2007-01-25 06:40:21 +00:00
/* doc/reference.conf - charybdis Example configuration file
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Copyright (C) 2005-2006 charybdis development team
*
* Written by ejb, wcampbel, db, leeh and others
*
2007-11-17 21:55:48 +00:00
* $Id: reference.conf 3582 2007-11-17 21:55:48Z jilles $
2007-01-25 06:40:21 +00:00
*/
/* IMPORTANT NOTES:
*
* class {} blocks MUST be specified before anything that uses them. That
* means they must be defined before auth {} and before connect {}.
*
* auth {} blocks MUST be specified in order of precedence. The first one
* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*
* Both shell style (#) and C style comments are supported.
*
* Files may be included by either:
* .include "filename"
* .include <filename>
*
* Times/durations are written as:
* 12 hours 30 minutes 1 second
*
* Valid units of time:
* month, week, day, hour, minute, second
*
* Valid units of size:
* megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
*
* Sizes and times may be singular or plural.
*/
/* Extensions:
*
* Charybdis contains several extensions that are not enabled by default.
* To use them, uncomment the lines below.
*
* Restrict channel creation to logged in users -- createauthonly.so
* Account bans (+b $a[:mask]) -- extb_account.so
* Banned from another channel (+b $j:mask) -- extb_canjoin.so
* Other-channel bans (+b $c:mask) -- extb_channel.so
* Extended ban (+b $x:mask) -- extb_extgecos.so
* Oper bans (+b $o) -- extb_oper.so
* Realname (gecos) bans (+b $r:mask) -- extb_realname.so
* Server bans (+b $s:mask) -- extb_server.so
* HURT system -- hurt.so
* Host mangling (umode +h) -- ip_cloaking.so
* Find channel forwards -- m_findforwards.so
* /identify support -- m_identify.so
* Opers cannot be invisible (umode +i) -- no_oper_invis.so
* Far connection notices (snomask +F) -- sno_farconnect.so
* Remote k/d/g/x line active notices -- sno_globalkline.so
* Remote oper up notices -- sno_globaloper.so
2007-05-24 04:16:02 +00:00
* /whois notifications (snomask +W) -- sno_whois.so
2007-01-25 06:40:21 +00:00
*/
#loadmodule "extensions/createauthonly.so";
#loadmodule "extensions/extb_account.so";
#loadmodule "extensions/extb_canjoin.so";
#loadmodule "extensions/extb_channel.so";
#loadmodule "extensions/extb_extgecos.so";
#loadmodule "extensions/extb_oper.so";
#loadmodule "extensions/extb_realname.so";
#loadmodule "extensions/extb_server.so";
#loadmodule "extensions/hurt.so";
#loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
#loadmodule "extensions/m_identify.so";
#loadmodule "extensions/no_oper_invis.so";
#loadmodule "extensions/sno_farconnect.so";
#loadmodule "extensions/sno_globalkline.so";
#loadmodule "extensions/sno_globaloper.so";
2007-05-24 04:02:33 +00:00
#loadmodule "extensions/sno_whois.so";
2007-01-25 06:40:21 +00:00
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
/* name: the name of our server */
name = "hades.arpa";
/* sid: the unique server id of our server. This must be three
* characters long. The first character must be a digit [0-9], the
* remaining two chars may be letters [A-Z] or digits [0-9].
*
2007-08-09 06:47:26 +00:00
* This parameter must be specified for the server to start.
2007-01-25 06:40:21 +00:00
*/
sid = "42X";
/* description: the description of our server. '[' and ']' may not
* be used here for compatibility with older servers.
*/
description = "charybdis test server";
/* network info: the name and description of the network this server
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
network_desc = "This is My Network";
/* hub: allow this server to act as a hub and have multiple servers
* connected to it.
*/
hub = no;
/* vhost: the IP to bind to when we connect outward to ipv4 servers.
* This should be an ipv4 IP only.
*/
#vhost = "192.169.0.1";
/* vhost6: the IP to bind to when we connect outward to ipv6 servers.
* This should be an ipv6 IP only.
*/
#vhost6 = "3ffe:80e8:546::2";
2007-03-05 18:58:38 +00:00
/* max_clients: this should be set to the maximum amount of clients
2007-04-05 00:12:55 +00:00
* that the server should support. Note that you should leave some
* file descriptors free for log files, server connections, ident
* lookups (if enabled), exceed_limit clients, etc.
2007-03-05 18:58:38 +00:00
*/
max_clients = 1024;
2007-01-25 06:40:21 +00:00
};
/* admin {}: contains admin information about the server. (OLD A:) */
admin {
name = "Smurf target";
description = "Main Server Administrator";
email = "<syn@packets.r.us>";
};
/* log {}: contains information about logfiles. */
log {
/* logfiles: the logfiles to use for specific activity. if these
* paths are defined, then ircd will log to them, otherwise it wont.
*
* The confs are, in order:
* - userlog: user exits
* - fuserlog: failed user connections
* - operlog: /oper usage
* - foperlog: failed /oper usage
* - serverlog: server connects/disconnects
* - glinelog: glines
* - klinelog: klines, etc
* - killlog: kills
* - operspylog: operspy usage
* - ioerrorlog: IO errors
*/
fname_userlog = "logs/userlog";
#fname_fuserlog = "logs/fuserlog";
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
fname_glinelog = "logs/glinelog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
#fname_ioerrorlog = "logs/ioerror";
};
/* class {}: contain information about classes for users (OLD Y:) */
class "users" {
/* class name must go above */
/* ping time: how often a client must reply to a PING from the
* server before they are dropped.
*/
ping_time = 2 minutes;
/* number per ident: the number of users per user@host networkwide
* allowed to connect. Unidented connections are classified as
* the same ident.
*/
number_per_ident = 2;
/* number per ip: the number of local users per host allowed */
number_per_ip = 3;
/* number per ip global: the number of network wide connections
* per host allowed for a user, including connections to the
* local server.
*/
number_per_ip_global = 5;
/* cidr_bitlen: Limits numbers of connections from a subnet size
* the following example makes the subnet /64 this is useful
* for IPv6 connections in particular
* Also note that the way charybdis is written if you have
* compiled support for IPv6, IPv4 cidr bitlens need to be modified
* Basically to get the approriate length add 96 to the IPv4 length
* For example for a /24 do 96+24 = 120
*
*/
cidr_bitlen = 64;
/* number_per_cidr: Number of connections to allow from a subnet of the
* size given in cidr_bitlen. 4 seems to be a good default to me.
*/
number_per_cidr = 4;
/* max number: the maximum number of users allowed in this class */
max_number = 100;
/* sendq: the amount of data allowed in a clients queue before
* they are dropped.
*/
sendq = 100 kbytes;
};
class "restricted" {
ping_time = 1 minute 30 seconds;
number_per_ip = 1;
max_number = 100;
sendq = 60kb;
};
class "opers" {
ping_time = 5 minutes;
number_per_ip = 10;
max_number = 100;
sendq = 100kbytes;
};
class "server" {
ping_time = 5 minutes;
/* connectfreq: only used in server classes. specifies the delay
* between autoconnecting to servers.
*/
connectfreq = 5 minutes;
/* max number: the amount of servers to autoconnect to */
max_number = 1;
/* sendq: servers need a higher sendq as they are sent more data */
sendq=2 megabytes;
};
/* listen {}: contain information about the ports ircd listens on (OLD P:) */
listen {
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
* ports are seperated via a comma, a range may be specified using ".."
*/
/* port: listen on all available IPs, ports 5000 and 6665 to 6669 */
port = 5000, 6665 .. 6669;
/* host: set a specific IP/host the ports after the line will listen
* on. This may be ipv4 or ipv6.
*/
host = "1.2.3.4";
port = 7000, 7001;
host = "3ffe:1234:a:b:c::d";
port = 7002;
};
/* auth {}: allow users to connect to the ircd (OLD I:) */
auth {
2007-08-29 22:04:45 +00:00
/* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
* lines are permitted per auth block. This is matched against the
* hostname and IP address (using :: shortening for IPv6 and
* prepending a 0 if it starts with a colon) and can also use CIDR
* masks.
2007-01-25 06:40:21 +00:00
*/
user = "*@172.16.0.0/12";
user = "*test@123D:B567:*";
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* flags = ...; below if it is.
*/
password = "letmein";
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
* dnsbl_exempt | exempt this user from dnsbls
* gline_exempt (old _ flag) | exempt this user from glines
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
* flood_exempt | exempt this user from flood limits
* USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */
class = "opers";
};
auth {
/* redirect: the server and port to redirect a user to. A user does
* not have to obey the redirection, the ircd just suggests to them
* an alternative server.
*/
redirserv = "irc.some.domain";
redirport = 6667;
user = "*.some.domain";
/* class: a class is required even though it is not used */
class = "users";
};
auth {
user = "*@*";
class = "users";
flags = need_ident;
};
/* operator {}: defines ircd operators. (OLD O:)
* charybdis no longer supports local operators, privileges are
* controlled via flags.
*/
operator "god" {
/* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is*
* supported now. auth{} spoofs work here, other spoofs do not.
* multiple user="" lines are supported.
*/
user = "*god@*";
user = "*@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
* contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
* A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
/* umodes: the specific umodes this oper gets when they oper.
* If this is specified an oper will not be given oper_umodes
* These are described above oper_only_umodes in general {};
*/
#umodes = locops, servnotice, operwall, wallop;
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
snomask = "+Zbfkrsuy";
/* privileges: controls the activities and commands an oper is
* allowed to do on the server. You may prefix an option with ~ to
* disable it, ie ~operwall
*
* Default flags are operwall, remoteban and encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
* local_kill: allows local users to be /KILL'd
* global_kill: allows local and remote users to be
* /KILL'd (OLD 'O' flag)
* remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
2007-11-17 21:55:48 +00:00
* kline: allows KLINE and DLINE (OLD 'K' flag)
2007-01-25 06:40:21 +00:00
* unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
* gline: allows GLINE (OLD 'G' flag)
* nick_changes: allows oper to see nickchanges (OLD 'N' flag)
2007-11-17 21:55:48 +00:00
* via snomask +n
2007-01-25 06:40:21 +00:00
* rehash: allows oper to REHASH config (OLD 'H' flag)
* die: allows DIE and RESTART (OLD 'D' flag)
* admin: gives admin privileges. admins
* may (un)load modules and see the
* real IPs of servers.
* hidden_admin: gives admin privileges except
* will not have the admin lines in
* stats p and whois.
* xline: allows use of /quote xline/unxline
2007-12-17 23:24:05 +00:00
* resv: allows /quote resv/unresv and cmode +LP [DEFAULT]
2007-11-17 21:55:48 +00:00
* operwall: allows the oper to send/receive operwalls [DEFAULT]
2007-01-25 06:40:21 +00:00
* oper_spy: allows 'operspy' features to see through +s
* channels etc. see /quote help operspy
* hidden_oper: hides the oper from /stats p (OLD UMODE +p)
* remoteban: allows remote kline etc [DEFAULT]
*/
flags = global_kill, remote, kline, unkline, gline,
die, rehash, admin, xline, operwall;
};
/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
connect "irc.uplink.com" {
/* the name must go above */
/* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
host = "192.168.0.1";
/* vhost: the host or IP to bind to for this connection. If this
* is not specified, the default vhost (in serverinfo {}) is used.
*/
#vhost = "192.168.0.50";
/* passwords: the passwords we send (OLD C:) and accept (OLD N:).
* The remote server will have these passwords reversed.
*/
send_password = "password";
accept_password = "anotherpassword";
/* port: the port to connect to this server on */
port = 6666;
/* hub mask: the mask of servers that this server may hub. Multiple
* entries are permitted
*/
hub_mask = "*";
/* leaf mask: the mask of servers this server may not hub. Multiple
* entries are permitted. Useful for forbidding EU -> US -> EU routes.
*/
#leaf_mask = "*.uk";
/* class: the class this server is in */
class = "server";
/* flags: controls special options for this server
* encrypted - marks the accept_password as being crypt()'d
* autoconn - automatically connect to this server
* compressed - compress traffic via ziplinks
* topicburst - burst topics between servers
*/
flags = compressed, topicburst;
};
connect "ipv6.some.server" {
2007-08-29 22:04:45 +00:00
/* Hosts that are IPv6 addresses must be in :: shortened form
* if applicable. Addresses starting with a colon get an extra
* zero prepended, for example: 0::1
*/
2007-01-25 06:40:21 +00:00
host = "3ffd:dead:beef::1";
send_password = "password";
accept_password = "password";
port = 6666;
/* aftype: controls whether the connection uses "ipv4" or "ipv6".
* Default is ipv4.
*/
aftype = ipv6;
class = "server";
};
/* cluster {}; servers that we propagate things to automatically.
* NOTE: This does NOT grant them privileges to apply anything locally,
* you must add a seperate shared block for that. Clustering will
* only be done for actions by LOCAL opers, that arent directed
* remotely.
*/
cluster {
/* name: the server to share with, this can be a wildcard and may be
* stacked.
*/
/* flags: list of what to share, all the name lines above this (up
* until another flags entry) will receive these flags.
*
* kline - share perm klines
* tkline - share temp klines
* unkline - share unklines
* locops - share locops
* xline - share perm xlines
* txline - share temp xlines
* unxline - share unxlines
* resv - share perm resvs
* tresv - share temp resvs
* unresv - share unresvs
* all - share all of the above
*/
/* share klines/unklines/xlines with *.lan */
name = "*.lan";
flags = kline, unkline, xline;
/* share locops with irc.ircd-ratbox.org and ircd.ircd-ratbox.org */
name = "irc.ircd-ratbox.org";
name = "ircd.ircd-ratbox.org";
flags = locops;
};
/* service{}: privileged servers (services). These servers have extra
* privileges such as setting login names on users and introducing clients
* with umode +S (unkickable, hide channels, etc). This does not allow them
* to set bans, you need a separate shared{} for that.
* Do not place normal servers here.
* There may be only one service{} block.
*/
service {
/* name: the server name. These may be stacked. */
name = "services.int";
};
/* shared {}: users that are allowed to place remote bans on our server.
* NOTE: These are ordered top down. The first one the user@host and server
* matches will be used. Their access will then be decided on that
* block and will not fall back to another block that matches.
*/
shared {
/* oper: the user@host and server the user must be on to set klines.
* The first field must be a user@host, the second field is an
* optional server. These may be stacked.
*/
/* flags: list of what to allow them to place, all the oper lines
* above this (up until another flags entry) will receive these
* flags. This *must* be present.
*
* kline - allow setting perm/temp klines
* tkline - allow setting temp klines
* unkline - allow removing klines
* xline - allow setting perm/temp xlines
* txline - allow setting temp xlines
* unxline - allow removing xlines
* resv - allow setting perm/temp resvs
* tresv - allow setting temp resvs
* unresv - allow removing xlines
* all - allow oper/server to do all of above.
* locops - allow locops - only used for servers who cluster
* rehash - allow rehashing
* none - disallow everything
*/
/* allow flame@*.leeh.co.uk on server irc.ircd-ratbox.org and
* allow leeh@*.leeh.co.uk on server ircd.ircd-ratbox.org to kline
*/
oper = "flame@*.leeh.co.uk", "irc.ircd-ratbox.org";
oper = "leeh@*.leeh.co.uk", "ircd.ircd-ratbox.org";
flags = kline;
/* you may forbid certain opers/servers from doing anything */
oper = "irc@vanity.oper", "*";
oper = "*@*", "irc.vanity.server";
oper = "irc@another.vanity.oper", "bigger.vanity.server";
flags = none;
/* or allow everyone to place temp klines */
oper = "*@*";
flags = tkline;
};
2007-05-18 20:31:33 +00:00
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
2007-01-25 06:40:21 +00:00
exempt {
ip = "192.168.0.0/16";
/* these may be stacked */
ip = "127.0.0.1";
ip = "10.0.0.0/8";
};
/* The channel block contains options pertaining to channels */
channel {
/* invex: Enable/disable channel mode +I, a n!u@h list of masks
* that can join a +i channel without an invite.
*/
use_invex = yes;
/* except: Enable/disable channel mode +e, a n!u@h list of masks
* that can join a channel through a ban (+b).
*/
use_except = yes;
/* forward: Enable/disable channel mode +f, a channel to forward
* users to if they can't join because of +i etc.
*/
use_forward = yes;
/* knock: Allows users to request an invite to a channel that
* is locked somehow (+ikl). If the channel is +p or you are banned
* the knock will not be sent.
*/
use_knock = yes;
/* knock delay: The amount of time a user must wait between issuing
* the knock command.
*/
knock_delay = 5 minutes;
/* knock channel delay: How often a knock to any specific channel
* is permitted, regardless of the user sending the knock.
*/
knock_delay_channel = 1 minute;
/* max chans: The maximum number of channels a user can join/be on. */
max_chans_per_user = 15;
/* max bans: maximum number of +b/e/I/q modes in a channel */
max_bans = 25;
/* max bans: maximum number of +b/e/I/q modes in a +L channel */
max_bans_large = 500;
/* splitcode: split users, split servers and either no join on split
* or no create on split must be enabled for split checking.
* splitmode will be entered on either split users or split servers
* dropping below the limit.
*
* you may force splitmode to be permanent by /quote set splitmode on
*/
/* split users: when the usercount is lower than this level, consider
* ourselves split. this must be set for automatic splitmode
*/
default_split_user_count = 0;
/* split servers: when the amount of servers that have acknowledged
* theyve finished bursting is lower than this, consider ourselves
* split. this must be set for automatic splitmode
*/
default_split_server_count = 0;
/* split: no create: disallow users creating channels on split */
no_create_on_split = no;
/* split: no join: disallow users joining channels at all on a split */
no_join_on_split = no;
/* burst topicwho: when bursting topics, also burst the topic setter */
burst_topicwho = yes;
/* kick on split riding: kick users riding splits to join +i or +k
* channels. more precisely, if a bursting server sends an SJOIN
* for a channel with a lower TS with either a +i mode or a +k
* mode with a different key, kick all local users.
*
* note: this does not take +r, +b, +e and +I into account.
*
* warning: if there are any TS5 servers on the network, this
* will cause ban desyncs if they send such an SJOIN and the
* splitriders added any bans (our side will lose them, the TS5
* side will accept them). we will send a notice to the channel
* if this happens. most services do not send such SJOINs but
* ratbox-services does.
*/
kick_on_split_riding = no;
};
/* The serverhide block contains the options regarding serverhiding */
serverhide {
2007-11-23 20:51:00 +00:00
/* flatten links: this option will hide various routing information
* and make all servers in /links appear that they are linked to
* this server.
2007-01-25 06:40:21 +00:00
*/
flatten_links = no;
2007-11-23 21:11:25 +00:00
/* links delay: how long to wait before showing splits or new
* servers in a flattened /links output.
2007-01-25 06:40:21 +00:00
*/
links_delay = 5 minutes;
2007-11-23 20:51:00 +00:00
/* hidden: hide this server from a /links output on servers with
* flatten_links enabled. this allows hub servers to be hidden etc.
2007-01-25 06:40:21 +00:00
*/
hidden = no;
/* disable hidden: prevent servers hiding themselves from a
* /links ouput.
*/
disable_hidden = no;
};
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
2007-01-25 07:08:21 +00:00
* They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason.
2007-01-25 06:40:21 +00:00
*
* These settings should be adequate for most networks, and are (presently)
* required for use on AthemeNet.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
*
2007-01-25 07:08:21 +00:00
* As of charybdis 2.2, you can do some keyword substitution on the rejection
* reason. The available keyword substitutions are:
*
* ${ip} - the user's IP
* ${host} - the user's canonical hostname
* ${dnsbl-host} - the dnsbl hostname the lookup was done against
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
2007-05-27 05:35:06 +00:00
* Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
2007-01-25 06:40:21 +00:00
* contacted, via email, at admins@2mbit.com before using these BLs.
* See <http://www.ahbl.org/services.php> for more information.
*/
2007-05-27 05:35:06 +00:00
blacklist {
host = "dnsbl.dronebl.org";
reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
2007-01-25 06:40:21 +00:00
# host = "ircbl.ahbl.org";
2007-01-25 07:08:21 +00:00
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
2007-01-25 06:40:21 +00:00
#
# host = "tor.ahbl.org";
2007-01-25 07:08:21 +00:00
# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
2007-05-27 05:35:06 +00:00
};
2007-01-25 06:40:21 +00:00
/*
* Alias blocks allow you to define custom commands. (Old m_sshortcut.c)
* They send PRIVMSG to the given target. A real command takes
* precedence above an alias.
*/
alias "NickServ" {
/* the name must go above */
/* target: the target nick (must be a network service) or
* user@server (cannot be this server, only opers can use
* user starting with "opers" reliably, interpreted on the target
* server only so you may need to use nick@server instead)
*/
target = "NickServ";
};
alias "ChanServ" {
target = "ChanServ";
};
alias "OperServ" {
target = "OperServ";
};
alias "MemoServ" {
target = "MemoServ";
};
alias "NS" {
target = "NickServ";
};
alias "CS" {
target = "ChanServ";
};
alias "OS" {
target = "OperServ";
};
alias "MS" {
target = "MemoServ";
};
/* The general block contains many of the options that were once compiled
* in options in config.h. The general block is read at start time.
*/
general {
/* hide error messages: defines whether error messages from
* servers are hidden or not. These can sometimes contain IPs and
* can have an adverse effect on server ip hiding. Set to:
* yes: hide from opers and admin
* opers: hide from opers only
* no: do not hide error messages
*/
hide_error_messages = opers;
/* hide spoof ips: hide the real ips of auth{} spoofed users
* If disabled, local opers can see them.
* Dynamic spoofs (e.g. set by services) are unaffected by this;
* any oper (local and remote) can see the real ip.
* Warning: for whowas, this is checked when the client exits,
* not when the IP is shown.
*/
hide_spoof_ips = yes;
/* default umodes: umodes to set upon connection
* If you have enabled the ip_cloaking extension, and you wish for
* incoming clients to be set +h upon connection, add +h to the umode
* string below.
*/
default_umodes = "+i";
/* default operstring: defines the default oper response
* in /whois queries, eg "is an IRC Operator".
* After startup use /quote set operstring to change.
*/
default_operstring = "is an IRC Operator";
/* default adminstring: defines the default admin response
* in /whois queries, eg "is a Server Administrator".
* After startup use /quote set adminstring to change.
*/
default_adminstring = "is a Server Administrator";
/* servicestring: defines the response for opered services (+S)
* in /whois queries, eg "is a Network Service".
* This is updated on rehash.
*/
servicestring = "is a Network Service";
/* disable fake channels: disable local users joining fake versions
* of channels, eg #foo^B^B. Disables bold, mirc colour, reverse,
* underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively).
*/
disable_fake_channels = no;
/* tkline_expire_notices: give a notice to opers when a tkline
* expires
*/
tkline_expire_notices = no;
/* floodcount: the default value of floodcount that is configurable
* via /quote set floodcount. This is the amount of lines a user
* may send to any other user/channel in one second.
*/
default_floodcount = 10;
/* failed oper notice: send a notice to all opers on the server when
* someone tries to OPER and uses the wrong password, host or ident.
*/
failed_oper_notice = yes;
/* dots in ident: the amount of '.' characters permitted in an ident
* reply before the user is rejected.
*/
dots_in_ident=2;
/* dot in ipv6: ircd-hybrid-6.0 and earlier will disallow hosts
* without a '.' in them. this will add one to the end. only needed
* for older servers.
*/
dot_in_ip6_addr = no;
/* min nonwildcard: the minimum non wildcard characters in k/d/g lines
* placed via the server. klines hand placed are exempt from limits.
* wildcard chars: '.' '*' '?' '@'
*/
min_nonwildcard = 4;
/* min nonwildcard simple: the minimum non wildcard characters in
* xlines/resvs placed via the server.
* wildcard chars: '*' '?'
*/
min_nonwildcard_simple = 3;
/* max accept: maximum allowed /accept's for +g usermode */
max_accept = 20;
/* max monitor: the maximum amount of nicknames a client may have in
* their monitor (server-side notify) list.
*/
max_monitor = 100;
/* nick flood: enable the nickflood control code */
anti_nick_flood = yes;
/* nick flood: the nick changes allowed in the specified period */
max_nick_time = 20 seconds;
max_nick_changes = 5;
/* anti spam time: the minimum time a user must be connected before
* custom quit messages are allowed.
*/
anti_spam_exit_message_time = 5 minutes;
/* ts delta: the time delta allowed between server clocks before
* a warning is given, or before the link is dropped. all servers
* should run ntpdate/rdate to keep clocks in sync
*/
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
/* client exit: prepend a users quit message with "Client exit: " */
client_exit = yes;
/* collision fnc: change user's nick to their UID instead of
* killing them, if possible. This setting only applies to nick
* collisions detected on this server. Only enable this if
* all servers on the network allow remote nicks to start with
* a digit.
*/
collision_fnc = yes;
/* global snotices: send out certain snotices (most +b, +f, +y,
* some +s) to other servers via ENCAP SNOTE. Received SNOTEs are
* displayed unconditionally.
*/
global_snotices = yes;
/* dline reason: show the user the dline reason when they connect
* and are dlined.
*/
dline_with_reason = yes;
/* kline delay: delay the checking of klines until a specified time.
* Useful if large kline lists are applied often to prevent the
* server eating CPU.
*/
kline_delay = 0 seconds;
/* kline reason: show the user the reason why they are k/d/glined
* on exit. may give away who set k/dline when set via tcm.
*/
kline_with_reason = yes;
/* kline reason: make the users quit message on channels this
* reason instead of the oper's reason.
*/
kline_reason = "Connection closed";
/* identify to services via server password
* if auth{} block had no password but the user specified a
* server password anyway, send a PRIVMSG to <identify_service>
* with as text <identify_command> <password>.
*/
identify_service = "NickServ@services.int";
identify_command = "IDENTIFY";
/* non redundant klines: flag and ignore redundant klines */
non_redundant_klines = yes;
/* warn no nline: warn opers about servers that try to connect but
* we dont have a connect {} block for. Twits with misconfigured
* servers can get really annoying with this enabled.
*/
warn_no_nline = yes;
/* stats e disabled: disable stats e. useful if server ips are
* exempted and you dont want them listing on irc.
*/
stats_e_disabled = no;
/* stats c oper only: make stats c (connect {}) oper only */
stats_c_oper_only=no;
/* stats h oper only: make stats h (hub_mask/leaf_mask) oper only */
stats_h_oper_only=no;
/* stats y oper only: make stats y (class {}) oper only */
stats_y_oper_only=no;
/* stats o oper only: make stats o (opers) oper only */
stats_o_oper_only=yes;
/* stats P oper only: make stats P (ports) oper only
* NOTE: users doing stats P will never be given the ips that the
* server listens on, simply the ports.
*/
stats_P_oper_only=no;
/* stats i oper only: make stats i (auth {}) oper only. set to:
* yes: show users no auth blocks, made oper only.
* masked: show users first matching auth block
* no: show users all auth blocks.
*/
stats_i_oper_only=masked;
/* stats k/K oper only: make stats k/K (klines) oper only. set to:
* yes: show users no auth blocks, made oper only
* masked: show users first matching auth block
* no: show users all auth blocks.
*/
stats_k_oper_only=masked;
/* map oper only: make /map oper only */
map_oper_only = no;
/* operspy admin only: make operspy notices to +Z admin only */
operspy_admin_only = no;
/* operspy dont care user info: treat /who mask as if there was
* an '!' always; do not log or server notice about operspy
* /who mask, /masktrace and /scan. channel information is still
* protected. */
operspy_dont_care_user_info = no;
/* caller id wait: time between notifying a +g user that somebody
* is messaging them.
*/
caller_id_wait = 1 minute;
/* pace wait simple: time between use of less intensive commands
* (HELP, remote WHOIS, WHOWAS)
*/
pace_wait_simple = 1 second;
/* pace wait: time between more intensive commands
* (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
*/
pace_wait = 10 seconds;
/* short motd: send clients a notice telling them to read the motd
* instead of forcing a motd to clients who may simply ignore it.
*/
short_motd = no;
/* ping cookies: require clients to respond exactly to a ping command,
* can help block certain types of drones and FTP PASV mode spoofing.
*/
ping_cookie = no;
/* connect timeout: sets how long we should wait for a connection
* request to succeed
*/
connect_timeout = 30 seconds;
/* disable auth: disables identd checking */
disable_auth = no;
/* no oper flood: increase flood limits for opers. */
no_oper_flood = yes;
/* glines: enable glines, network wide temp klines */
glines = no;
/* gline time: the amount of time a gline will remain before expiring */
gline_time = 1 day;
/* gline_min_cidr: If using a CIDR gline, the minimum length the
* mask must be
*/
gline_min_cidr = 16;
/* idletime: the maximum amount of time a user may idle before
* they are disconnected
*/
idletime = 0;
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
/* max targets: the maximum amount of targets in a single
* PRIVMSG/NOTICE. set to 999 NOT 0 for unlimited.
*/
max_targets = 4;
/* client flood: maximum number of lines in a clients queue before
* they are dropped for flooding.
*/
client_flood = 20;
/* use_whois_actually: send clients requesting a whois a numeric
* giving the real IP of non-spoofed clients to prevent DNS abuse.
*/
use_whois_actually = yes;
/* usermodes configurable: a list of usermodes for the options below
*
* +g - callerid - Server Side Ignore
* +D - deaf - Don't see channel messages
* +i - invisible - Not shown in NAMES or WHO unless you share a
* a channel
* +l - locops - See LOCOPS messages
* +Q - noforward - Unaffected by channel forwarding
* +R - regonlymsg - No messages from unindentified
* +s - servnotice - See server notices
* +w - wallop - See oper and server generated WALLOPS
* +z - operwall - See operwalls
*/
/* oper only umodes: usermodes only opers may set */
oper_only_umodes = operwall, locops, servnotice;
/* oper umodes: default usermodes opers get when they /oper */
oper_umodes = locops, servnotice, operwall, wallop;
/* oper snomask: default snomask opers get when they /oper,
* provided they have umode +s set */
oper_snomask = "+s";
/* servlink path: path to 'servlink' program used by ircd to handle
* encrypted/compressed server <-> server links.
*
* only define if servlink is not in same directory as ircd itself.
*/
#servlink_path = "/usr/local/ircd/bin/servlink";
/* use egd: if your system does not have *random devices yet you
* want to use OpenSSL and encrypted links, enable this. Beware -
* EGD is *very* CPU intensive when gathering data for its pool
*/
#use_egd = yes;
/* egdpool path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
* which automatically finds the path.
*/
#egdpool_path = "/var/run/egd-pool";
/* compression level: level of compression for compressed links between
* servers.
*
* values are between: 1 (least compression, fastest)
* and: 9 (most compression, slowest).
*/
#compression_level = 6;
/* burst_away: This enables bursting away messages to servers.
* With this disabled, we will only propogate AWAY messages
* as users send them, but never burst them. Be warned though
* enabling this could increase the size of a burst significantly
* for a large network, like EFnet.
*/
burst_away = yes;
/* nick delay: This locks nicks of split clients for the given time
* or until a remote client uses the nick. This significantly
* reduces nick collisions on short splits but it can be annoying.
* To make things as fair as possible, this should be the same on
* all servers. If you enable this, the suggested value is 15 minutes.
*/
nick_delay = 0 seconds;
/* reject time: the amount of rejections through klines/dlines etc
* allowed in the given time before the rejection is cached and
* a pseudo temp dline is placed
*/
reject_ban_time = 1 minute;
reject_after_count = 3;
/* reject duration: the amount of time to cache the rejection */
reject_duration = 5 minutes;
2007-05-14 22:21:16 +00:00
/* max_unknown_ip: maximum number of pending connections to the server
* that are allowed per IP address
*/
max_unknown_ip = 2;
2007-01-25 06:40:21 +00:00
};
modules {
/* module path: paths to search for modules specified below and
* in /modload.
*/
path = "/usr/local/ircd/modules";
path = "/usr/local/ircd/modules/autoload";
/* module: the name of a module to load on startup/rehash */
#module = "some_module.so";
};
