This only supports two addresses as the intended use is 1 IPv4 and 1 IPv6
address on a single-homed host, and the only supported configuration of
outgoing connections to other servers is to bind a single IPv4 or IPv6
address.
- Add (void) casts for unused function parameters
- Rearrange member in `struct rb_mbedtls_cfg_context' for data alignment
- Document a `clang-4.0 -Weverything' (-Wcast-qual) diagnostic
- Avoid pointless conversions between positive/negative error codes
- Use capital hexadecimals in error codes and properly cast to
(unsigned int) for %x/%X
If an IPv4 connection is dropped by the pre-callback, and there is a
pending IPv6 connection on the same listening socket then the retried
accept() will be unable to populate `st` because `addrlen` will be too
small. Also initialise `st` each time to avoid a clang static analysis
warning.
[ircd/match.c:316]: (error) Shifting a negative value is undefined behaviour
[librb/src/patricia.c:55]: (error) Shifting a negative value is undefined behaviour
[modules/m_alias.c:64]: (portability) '(void*)message' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[modules/m_time.c:111]: (warning) %u in format string (no. 9) requires 'unsigned int' but the argument type is 'signed int'.
[modules/m_time.c:111]: (warning) %u in format string (no. 10) requires 'unsigned int' but the argument type is 'signed int'.
[librb/src/dictionary.c:819]: (warning) %d in format string (no. 3) requires 'int' but the argument type is 'unsigned int'.
[librb/src/radixtree.c:1080]: (warning) %d in format string (no. 3) requires 'int' but the argument type is 'unsigned int'.
[ircd/s_user.c:351] -> [ircd/s_user.c:357]: (warning) Either the condition '0!=source_p' is redundant or there is possible null pointer dereference: source_p.
[extensions/ip_cloaking_3.0.c:109]: (warning, inconclusive) The buffer 'buf' may not be null-terminated after the call to strncpy().
[ircd/chmode.c:256]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_help.c:100]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_knock.c:169]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_stats.c:628]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_stats.c:727]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:601]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:704]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:739]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:763]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:768]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:774]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:781]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:786]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:791]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:804]: (style) Clarify calculation precedence for '&' and '?'.
[ircd/wsproc.c:372]: (style) Unused variable: len
[modules/core/m_modules.c:382]: (style) Unused variable: i
[modules/m_stats.c:741]: (style) Unused variable: amsg
[ircd/authproc.c:390]: (style) Unused variable: iter
[ircd/authproc.c:391]: (style) Unused variable: client_p
The changes made in this file are detailed in release/3.5 commits
4d89c83c32 through ecfdcb08e8 inclusive.
Some slight alterations are necessary; librb instead of libratbox,
snprintf() instead of rb_snprintf(), etc. Also, release/4 has
offline certificate digesting functionality. For more insight,
simply diff the gnutls.c between release/3.5 and release/4.
The changes made in this file are detailed in release/3.5 commits
295c8f7d37 through 265dc4e53c inclusive.
Some slight alterations are necessary; librb instead of libratbox,
snprintf() instead of rb_snprintf(), etc. Also, release/4 has
offline certificate digesting functionality. For more insight,
simply diff the mbedtls.c between release/3.5 and release/4.
The changes made in this file are detailed in release/3.5 commits
1f30c8943b through 92c04c6b9d inclusive.
Some slight alterations are necessary; librb instead of libratbox,
snprintf() instead of rb_snprintf(), etc. Also, release/4 has
offline certificate digesting functionality. For more insight,
simply diff the openssl.c between release/3.5 and release/4.
This is a forward-port of release/3.5 commit 566f4678
* Add generic direction enum for negotiation setup.
* Rename a rather long wrapper function to a shorter one consistent with
what it does.
* Rework context setup function.
* Don't check for handshake state before beginning handshaking.
The old backend began a handshake and then stepped into the callback
function if it was interrupted; the current one just jumps right into
it, so there is no need to check if it has previously succeeded,
because it hasn't been attempted yet.
* Add missing errno assignment to one of the handshake wrappers.
* Don't bother checking if SSL_P(F) is NULL when we already checked if
F->ssl is NULL -- this should be impossible.
* Don't bother checking if SSL_C(F) is NULL -- this was a no-op.
* Change the socket send and recv functions to not peer into a foreign
ratbox structure -- use the correct function to get the socket fd.
* Rewrap some lines and function arguments.
Other backends will be brought into line with this backend soon.
This will enable easier maintenance of the backends, by reducing the
diffs between them, which should make different behaviour easier to
spot.
At the moment, if a link quits in just the right (wrong [1]) way,
the quit reason will resemble:
<-- foo (~bar@baz) has quit (Read error: (-0x0) )
This should resolve that.
[1] Peers should send a close_notify alert before abruptly shutting
down their socket. This will result in a sane quit message:
<-- foo (~bar@baz) has quit (Read error: (-0x7880) SSL -
The peer notified us that the connection is going to be closed)
[ci skip]
If initialising the server context fails, but the client one succeeds,
we will not only leak memory, but the error message reported for
initialising the server context might not make sense, because we
initialise the client context after and that could erase or change the
list of queued errors.
This scenario is considered rare. Nevertheless, we now initialise the
client context after *successfully* initialising the server context.
Commit cf12678 introduced a fix for issue #186 by freeing the old SSL_CTX
structure before constructing a new one, which could disconnect existing
clients otherwise.
Unfortunately, the freeing is done first, which means that if setting up
a new structure fails for any reason, there will be no usable structures
left, but they are still referenced.
This fix moves the freeing to the end of the function, using intermediate
new variables in the meantime. This problem was discovered while testing
against OpenSSL 1.1.0 RC6.
