Aaron Jones
e386d7f362
reference.conf: missed a line
...
(see previous commit) [ci skip]
2016-12-01 05:15:30 +00:00
Aaron Jones
2815967598
reference.conf: simplify SPKI fingerprint generation commands
...
[ci skip]
2016-12-01 05:08:15 +00:00
Aaron Jones
256e6fd251
reference.conf: Use proper IPv6 RFC Documentation Range Subnet
...
[ci skip]
2016-11-27 20:50:20 +00:00
Aaron Jones
785df805d7
reference.conf: bump the recommended digest algorithm from SHA-1 to SHA2-256
...
ircd.conf.example still has SHA-1 for the people who want to quickly deploy
by renaming that file and adjusting as appropriate.
2016-11-15 12:34:49 +00:00
Aaron Jones
2afd965b21
TLS: Partially backport the SubjectPublicKeyInfo digesting functionality
...
This backports the code responsible for SPKI digests from release/4.
It also adjusts doc/reference.conf to note that SPKI digests are now
supported, and how to generate them. It does NOT backport the mkfingerprint
program -- the instructions in reference.conf are sufficient. I am ofcourse
open to anyone else backporting the program, but I don't see the need.
2016-11-15 12:30:09 +00:00
Aaron Jones
419f0c6af7
reference.conf: Document fingerprint generation
...
[ci skip]
2016-07-16 05:42:00 +00:00
Aaron Jones
56f1d769bd
Document extb_usermode module in reference.conf
...
Also add it to the example configuration files
[ci skip]
2016-03-28 03:34:36 +01:00
William Pitcock
d513218a9e
LIST: allow channel display threshold to be configured ( closes #109 )
2015-12-26 22:23:28 -06:00
William Pitcock
c1725bda3c
ssl: allow cipher list to be overridden ( closes #67 )
2015-12-12 07:50:48 -06:00
William Pitcock
63eb8567cb
implement configurable channel modes ( closes #31 )
...
While functionally compatible with the implementation in ElementalIRCd, our approach is different,
specifically pre-calculating the bitmask at config load time. This is more efficient, and allows us
to report errors as part of the configuration phase.
2015-12-11 15:36:53 -06:00
William Pitcock
98c645cadb
document extb_combi and extb_hostmask bans ( closes #74 )
2015-12-10 02:27:08 -06:00
William Pitcock
7801d174d7
Revert "extban: implement helper functions for stackable extbans (part 1) (ref #74 )"
...
This reverts commit 304bd0d095
2015-12-10 02:19:21 -06:00
William Pitcock
304bd0d095
extban: implement helper functions for stackable extbans (part 1) (ref #74 )
2015-12-10 01:33:30 -06:00
William Pitcock
13d8f0edba
allow certfp method to be configured
2015-12-07 01:49:30 -06:00
Andrew Wilcox
5f8fb56d02
Revert "remove MONITOR for now pending a complete rewrite"
...
This reverts commit 87fa262fec
2015-10-15 17:31:55 -05:00
William Pitcock
87fa262fec
remove MONITOR for now pending a complete rewrite
2015-10-15 09:39:48 -05:00
Aaron Jones
c9b5cd623b
Remove network_desc configuration option, never actually used anywhere
2015-03-26 14:46:54 -05:00
William Pitcock
c021aafd66
ircd manpage: remove references to ircd.conf(5) ( closes #91 )
2015-03-22 16:42:11 -05:00
rnjohnson18
3514f17e98
Change example.conf to ircd.conf.example
2015-03-08 19:16:36 -05:00
William Pitcock
bb2a50509a
config: further EGD removal
2015-03-01 01:06:58 -06:00
William Pitcock
654caa84fb
ircd.conf.example: explain DH parameters size better ( closes #68 )
2015-02-18 12:36:00 -06:00
Max Teufel
7d33cce8ef
m_sasl: add configuration option for the nick of the SASL agent
...
This allows multiple improvements to m_sasl. With this change, the SASL
authentication gets aborted immediately when services are offline.
Additionally, we send the SASL ENCAP messages directly to the specified
SASL agent.
2015-02-14 20:31:25 +01:00
Mantas Mikulėnas
423d875b7f
doc/sasl.txt: forgot to wrap lines and sort references
2014-09-08 22:37:40 +03:00
Mantas Mikulėnas
f3319b3b2e
doc/sasl.txt: drop dead links, add links to IRCv3 spec and relevant SASL RFCs
2014-09-08 22:27:36 +03:00
Max Teufel
b3c4dfd7f2
example configs: change ssl_cert to etc/ssl.pem
...
The genssl script writes to etc/ssl.pem by default.
2014-07-13 18:12:54 +02:00
Jilles Tjoelker
f6b62c59bb
Chase change from example.conf to ircd.conf.example in various places.
2014-06-12 23:43:05 +02:00
Jilles Tjoelker
d0c2fc8266
server: Require EX and IE capabilities (+e and +I cmodes).
...
The code to send each channel mode only to servers supporting it was
broken a while ago and was not very useful anyway. Therefore, require
all connecting servers to support all standard channel modes.
2014-05-29 16:24:42 +02:00
Jilles Tjoelker
a0998bcdd7
example confs: Remove AHBL blacklists, which are no longer available.
2014-04-06 12:34:03 +02:00
Jilles Tjoelker
4229cef34c
doc/extban: Correct description of EXTBAN token in 005.
...
The change from EXTBAN=$:<types> to EXTBAN=$,<types> was made later on
and the documentation was not adjusted.
2014-03-01 18:16:40 +01:00
Jilles Tjoelker
a5de4edefd
doc/ts6-protocol: Document ETB message (EOPMOD capab).
2014-02-22 17:45:42 +01:00
Mantas Mikulėnas
9337f5ce45
doc/ts6-protocol: Correct the mode letter for termination
2014-01-12 21:17:52 +02:00
Jilles Tjoelker
cba8bbc3fc
Use RFC5737 and RFC3849 addresses in example confs.
...
There are IPv4 and IPv6 ranges reserved for documentation and example code;
use these to minimize the risk if someone accidentally uses an unmodified
example conf.
2013-10-06 19:39:30 +02:00
Jilles Tjoelker
364e59f82a
whowas: Use the normal rules for IP visibility.
...
Add the flags (auth{} spoof, dynamic spoof) to struct Whowas and add a
show_ip_whowas().
Normal users now see IPs of unspoofed users, and remote opers can see IPs
behind dynamic spoofs. Also, general::hide_spoof_ips is now applied when
the IP is shown, not when the client exits.
2013-09-14 12:26:32 +02:00
Jilles Tjoelker
7a9a9000b7
Enable remote WHOWAS queries.
...
On ircd-seven, this will allow remote opers to see certain hidden IPs.
2013-09-13 22:29:26 +02:00
Quora Dodrill
792ddf977e
doc: fix name of sample config again
2013-08-24 09:41:00 -05:00
Quora Dodrill
e3b534df81
doc: Example configuration renamed to ircd.conf.example
...
This is to follow the precident set by Atheme's atheme.conf.example file. Since the ircd now fails to start on a non-existant configuration file, seeing that message would make one know where to look.
2013-07-09 20:01:16 -07:00
Alex Iadicicco
ef861b0567
Mention channel name parameter to SJOIN in ts6-protocol.txt
2013-05-15 00:27:40 -07:00
Jilles Tjoelker
0ef5377a36
Rename m_nokillservices.so to no_kill_services.so per the naming scheme.
2013-04-27 17:00:10 +02:00
Elizabeth Myers
f0bce9d95d
Tweak docs.
...
Also, last commit fixes #16 . :p
2013-04-20 20:52:34 -05:00
Elizabeth Myers
3c93d380e0
Add support for multiple forms of blacklist queries using matches.
...
It supports both literal and last octet matches from the dnsbl.
If matches is not present, the old behaviour is used.
2013-04-20 20:49:11 -05:00
Elizabeth Myers
15d7a31134
Add m_nokillservices to documentation
2013-04-20 01:14:54 -05:00
Jilles Tjoelker
f09c28e18f
reference.conf: Correct description of general::client_exit.
...
It prefixes with "Quit: ", not "Client exit: ".
2013-01-01 18:07:37 +01:00
William Pitcock
f0c778d701
Merge pull request #2 from TheChrisAM/patch-1
...
Adding auth_user documentation for auth {} blocks.
2012-07-30 10:00:49 -07:00
Jilles Tjoelker
2b121c81f5
reference.conf: Extend documentation for max_number in server classes.
2012-07-28 15:31:44 +02:00
TheChrisAM
f9bb3e0d72
Adding auth_user documentation for auth {} blocks.
2012-05-31 21:26:52 -03:00
Jilles Tjoelker
1e23af243b
Fix null value for EUID account name in TS6 protocol document.
2012-04-30 18:32:04 +02:00
Jilles Tjoelker
8f5402d369
reference.conf: Remove need_ident from *@* auth block.
...
Few people want need_ident for everyone these days, so remove it from
reference.conf. It was not in example.conf.
2012-03-29 22:41:24 +02:00
Keith Buck
330692a1f2
Add option to immediately apply nick RESVs by FNC'ing.
2012-03-25 01:34:45 +00:00
William Pitcock
02270e9602
Add listen::defer_accept option for controlling usage of TCP_DEFER_ACCEPT option.
2012-03-17 10:00:39 -05:00
Jilles Tjoelker
755c144eb6
Specify more about IP addresses in TS6 protocol document.
2012-03-13 22:41:39 +01:00
