Commit graph

112 commits

Author SHA1 Message Date
Ed Kellett
f57d88bc71 Remove shared blocks 2020-11-01 04:20:44 +00:00
Eric Mertens
67ab06dd8a
Combine stats A output parameters (#35)
Every other use of RPL_STATSDEBUG follows the format: <letter> :<text>

This case appeared to slip through because it's two-word argument is encoded
in a single `->data` buffer.
2020-10-27 16:39:38 -07:00
Aaron Jones
9dd128b4da
Merge pull request #288 from edk0/umode-o-split
Split oper privs up a bit
2020-08-06 09:07:50 +00:00
Ed Kellett
7f7a433218
m_stats: Remove outdated comment 2020-08-04 22:58:31 +01:00
Ed Kellett
b549e8e80d
m_stats: use oper:privs for /stats O 2020-08-04 22:58:30 +01:00
Ed Kellett
326ecd968b
m_stats: Rework privilege requirements
.need_oper is replaced with a generic mechanism for requiring any
privilege. need_admin remains because I think it's the least horrible
way to deal with oper:hidden_admin.

All need_oper requirements have been changed to oper:general
requirements.
2020-08-04 22:58:30 +01:00
Ed Kellett
9039ac0178
m_stats: use designated initializers 2020-08-04 22:58:30 +01:00
Ed Kellett
6d5be11fb1
Add oper:privs 2020-08-04 22:58:30 +01:00
Ed Kellett
d4f7eb4ce6
Replace most checks for +o with oper:general
I'm preparing to PR a succession of privs changes with the ultimate goal
of severely limiting the scope of the binary oper/user dichotomy and
move conceptually distinct oper functions into their own privs.

Accomplishing this is a non-trivial task, and can wait, but it's
inconvenient now to have such functions enabled by the same mechanism
that grants any privs at all--so I'm moving all of them to a
transitional priv with the intention of eroding that later.
2020-08-04 22:58:30 +01:00
Ed Kellett
24652f2b95
m_stats: Make /stats l respect oper hiding
found by @jesopo
2020-08-03 01:23:54 +01:00
Ariadne Conill
3321eef45a ircd: rename DNSBL entries from blacklist to dnsbl_entry. 2020-07-05 21:20:31 -06:00
Ed Kellett
e902e16974
m_stats: don't ratelimit with no server argument 2019-09-15 20:05:51 +01:00
Ed Kellett
1123eefcb0
Rework oper hiding
As it stands, oper hiding is rather messy and inconsistent. Add
SeesOper(target, source), which is true iff target should appear as an
oper to source. If I haven't missed something, all commands that reveal
oper status now use the same logic.

general::hide_opers_in_whois is a special case, and affects /whois only.

general::hide_opers is introduced, and has the same effect as giving
everyone oper:hidden. All commands that reveal oper status respect both.
2019-09-12 23:14:15 +01:00
Simon Arlott
6003ce763c
Add outgoing SCTP connect support 2017-08-24 20:08:21 +01:00
Simon Arlott
169a1c3535
msgbuf: s_assert is not a substitute for proper code
(dns, m_alias, m_stats updated as msgbuf no longer includes s_assert.h)
2017-07-26 19:30:41 +01:00
Simon Arlott
d8f0b5d763
cppcheck: fix various warnings/errors
[ircd/match.c:316]: (error) Shifting a negative value is undefined behaviour
[librb/src/patricia.c:55]: (error) Shifting a negative value is undefined behaviour
[modules/m_alias.c:64]: (portability) '(void*)message' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[modules/m_time.c:111]: (warning) %u in format string (no. 9) requires 'unsigned int' but the argument type is 'signed int'.
[modules/m_time.c:111]: (warning) %u in format string (no. 10) requires 'unsigned int' but the argument type is 'signed int'.
[librb/src/dictionary.c:819]: (warning) %d in format string (no. 3) requires 'int' but the argument type is 'unsigned int'.
[librb/src/radixtree.c:1080]: (warning) %d in format string (no. 3) requires 'int' but the argument type is 'unsigned int'.
[ircd/s_user.c:351] -> [ircd/s_user.c:357]: (warning) Either the condition '0!=source_p' is redundant or there is possible null pointer dereference: source_p.
[extensions/ip_cloaking_3.0.c:109]: (warning, inconclusive) The buffer 'buf' may not be null-terminated after the call to strncpy().
[ircd/chmode.c:256]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_help.c:100]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_knock.c:169]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_stats.c:628]: (style) Clarify calculation precedence for '&' and '?'.
[modules/m_stats.c:727]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:601]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:704]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:739]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:763]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:768]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:774]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:781]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:786]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:791]: (style) Clarify calculation precedence for '&' and '?'.
[librb/src/radixtree.c:804]: (style) Clarify calculation precedence for '&' and '?'.
[ircd/wsproc.c:372]: (style) Unused variable: len
[modules/core/m_modules.c:382]: (style) Unused variable: i
[modules/m_stats.c:741]: (style) Unused variable: amsg
[ircd/authproc.c:390]: (style) Unused variable: iter
[ircd/authproc.c:391]: (style) Unused variable: client_p
2016-10-28 20:13:36 +01:00
Simon Arlott
896370cc3e
m_stats: don't try to access bl_stats if it doesn't exist 2016-04-30 13:18:48 +01:00
Simon Arlott
3085734104
m_stats: display certificate fingerprint in STATS C 2016-04-24 01:06:51 +01:00
Elizabeth Myers
5e9a3f8674
Change the way authd configures opm
It's a bit of a hack, but better than before. Rather than rehashing
(which could get us into an endless loop), we now segregate the
configuration phase (creating entries ircd-side in case we restart authd
later) and sending phases (when configure_authd() is called). Since we
have to call configure_authd() no matter what (to send timeouts etc.)
and we have to send this data to configure authd anyway, and sending
duplicate data is bad, this is the only way I can think of for now.
2016-04-12 09:36:09 -05:00
Elizabeth Myers
95b0324658 m_stats: use macros to clean up generating the stats table 2016-04-07 03:27:50 -05:00
Elizabeth Myers
0d7e4d311a m_stats: don't list alias entries twice. 2016-04-06 11:45:55 -05:00
Elizabeth Myers
d3f6b80867 Replace s_auth/blacklist stuff with authd calls
This also does a lot of surgery on the conf system to reconfigure authd.

/!\ WARNING! ACHTUNG! ADVERTENCIA! ATTENTION! AVVERTIMENTO! /!\
This code has not been run-time tested yet (though it compiles)!
2016-03-28 02:11:16 -05:00
Elizabeth Myers
79435744c7 common.h: raison d'être is gone, so out it goes.
Fold whatever was left into ircd_defs.h
2016-03-23 09:33:56 -05:00
Elizabeth Myers
2fc6772ee1 typedef-ify rb_radixtree for consistency. 2016-03-23 08:32:22 -05:00
Elizabeth Myers
4177311e6e Change struct Dictionary(*) to rb_dictionary(_\1).
This cleans things up a slightly and puts the dictionary stuff in its
own namespace.
2016-03-23 08:09:58 -05:00
Elizabeth Myers
56f84dedf7 DICTIONARY_FOREACH → RB_DICTIONARY_FOREACH
This is in librb and therefore should be prefixed.
2016-03-23 07:45:44 -05:00
Matt Ullman
e23126c83b Cleanup warnings 2016-03-21 22:28:41 -04:00
William Pitcock
2d77d121a3 m_stats: win32 fixes 2016-03-20 02:19:36 -05:00
Elizabeth Myers
788e2d592c m_stats: eliminate special casing of calling the stats L handler. 2016-03-09 17:19:16 -06:00
Mantas Mikulėnas
6f39a80ec6 authd, m_stats: fix command table sizes
There are 256 possible byte values.
2016-03-09 18:15:42 +02:00
Elizabeth Myers
3c7d6fcce7 Message handlers should return void.
Also fix up some return values and stuff to use bool (or void if
nothing). I just did it whilst I was here.

According to jilles, the return value used to signify whether or not the
client had exited. This was error-prone and was fixed a long, long time
ago, but the return value was left int for historical reasons.

Since the return type is not used (and has no clear use case anyway),
it's safe to just get rid of it.
2016-03-09 01:37:03 -06:00
Elizabeth Myers
eeabf33a7c Move module description headers to the top
This is cleaner.

Note this was broken out of a much larger piece of work I did, so if
there's any problems, I apologise!
2016-03-09 01:29:41 -06:00
Elizabeth Myers
963c3faa43 m_stats: kill O(n) lookup on stats. 2016-03-08 04:38:42 -06:00
Elizabeth Myers
55799c6b4d dns: prune worthless function. 2016-03-08 03:25:21 -06:00
Elizabeth Myers
8a26cd1973 dns: clean up awful hacks.
We now have a resolver cache which we init on startup.
2016-03-08 03:22:25 -06:00
Elizabeth Myers
394b8dde17 authd: allow querying the list of DNS servers.
This was an asston of pain, and it still feels "dirty" as it introduces
an async call where there normally wouldn't be one. Better
implementation more than welcome.
2016-03-08 02:53:25 -06:00
Andrew Wilcox
3abc337fe1 modules: Add AV2 descriptions to all m_s* modules 2016-03-07 02:05:28 -06:00
Elizabeth Myers
105a4985b4 Migrate remaining modules to AV2
No descriptions yet. :(
2016-03-07 00:03:39 -06:00
Elizabeth Myers
a4bf26dd34 Move irc_* data structures to librb.
This makes the base ircd less cluttered up with data structures that can
go elsewhere.
2016-03-06 14:17:19 -06:00
Elizabeth Myers
cbeab4bc34 Remove $Id tags from everything.
These are obsolete and none have changed since 10 years gao...
2016-03-06 02:47:27 -06:00
Elizabeth Myers
e8f1c19e7b parse: get rid of report_messages
It is a function with a single usage, that is used only for one specific
stats command on one line.
2016-03-05 00:55:33 -06:00
Simon Arlott
e9ffc3c153
ssld: provide version in stats S output 2016-03-03 22:14:50 +00:00
Simon Arlott
035d9143bd ircd: add missing sslproc function ssld_foreach_info()
Iterate through the ssl daemons and report their status.
2016-03-01 21:30:51 +00:00
William Pitcock
7baa37a9ef msg: remove last vestiges of the fakelag system. charybdis has never supported fakelag. 2016-02-19 16:43:39 -06:00
William Pitcock
428ca87b01 modules: chase MsgBuf API change 2016-02-10 20:54:17 -06:00
Simon Arlott
eb1b303d56 ircd: support restarting ssld processes
Add REHASH SSLD (admins only) that starts new sslds and marks the
existing ones as inactive until all their clients disconnect.

Very useful whenever the SSL library has a vulnerability because
new connections can use a new version of the library without
disconnecting existing clients/servers.

Add STATS S (admins only) to list ssld processes, status, and client
count.
2016-02-10 19:03:30 -06:00
William Pitcock
b47f8a4fda ircd: import modified version of ratbox 3.1 whowas code 2016-01-23 11:16:34 -05:00
William Pitcock
ea2d270096 STATS: allow modules to override normal stats requests 2016-01-14 06:57:04 -06:00
William Pitcock
cc7ae51cdc Allow remote DIE and RESTART (from ircd-seven) 2016-01-12 00:04:54 -06:00
William Pitcock
fe749d3709 ircd: implement GRANT subsystem based on ircd-seven 2016-01-11 23:02:03 -06:00