2020-10-15 14:51:12 +00:00
/* doc/reference.conf - solanum example configuration file
2007-01-25 06:40:21 +00:00
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Copyright (C) 2005-2006 charybdis development team
*
* Written by ejb, wcampbel, db, leeh and others
*
*/
/* IMPORTANT NOTES:
*
* class {} blocks MUST be specified before anything that uses them. That
* means they must be defined before auth {} and before connect {}.
*
* auth {} blocks MUST be specified in order of precedence. The first one
* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*
2008-09-12 22:32:22 +00:00
* privset {} blocks MUST be specified before anything that uses them. That
* means they must be defined before operator {}.
*
2007-01-25 06:40:21 +00:00
* Both shell style (#) and C style comments are supported.
*
* Files may be included by either:
* .include "filename"
* .include <filename>
*
* Times/durations are written as:
* 12 hours 30 minutes 1 second
2016-03-29 14:09:52 +00:00
*
2007-01-25 06:40:21 +00:00
* Valid units of time:
* month, week, day, hour, minute, second
*
* Valid units of size:
* megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
*
2016-03-29 14:09:52 +00:00
* Sizes and times may be singular or plural.
*/
2007-01-25 06:40:21 +00:00
/* Extensions:
*
* Charybdis contains several extensions that are not enabled by default.
* To use them, uncomment the lines below.
*
2016-03-13 02:10:46 +00:00
* Channel mode +-A (admin only) -- chm_adminonly
2016-05-12 04:39:42 +00:00
* Channel mode +-T (blocks notices) -- chm_nonotice
2016-03-13 02:10:46 +00:00
* Channel mode +-O (oper only) -- chm_operonly
* Channel mode +-S (ssl only) -- chm_sslonly
* Channel mode +-M (disallow KICK on IRC ops) -- chm_operpeace
* Restrict channel creation to logged in users -- createauthonly
* Account bans (+b $a[:mask]) -- extb_account
* Banned from another channel (+b $j:mask) -- extb_canjoin
* Other-channel bans (+b $c:mask) -- extb_channel
* Combination extbans -- extb_combi
* Extended ban (+b $x:mask) -- extb_extgecos
* Hostmask bans (for combination extbans) -- extb_hostmask
* Oper bans (+b $o) -- extb_oper
* Realname (gecos) bans (+b $r:mask) -- extb_realname
* Server bans (+b $s:mask) -- extb_server
* SSL bans (+b $z) -- extb_ssl
2016-03-28 02:28:07 +00:00
* User mode bans (+b $u:modes) -- extb_usermode
2020-10-26 23:48:23 +00:00
* Helpops system (umode +h) -- helpops
2016-03-13 02:10:46 +00:00
* HURT system -- hurt
* New host mangling (umode +x) -- ip_cloaking_4.0
* Old host mangling (umode +h) -- ip_cloaking
* Dynamically extend channel limits -- m_extendchans
* Find channel forwards -- m_findforwards
* /identify support -- m_identify
2016-04-02 10:20:30 +00:00
* /locops support -- m_locops
2016-03-13 02:10:46 +00:00
* Opers cannot be invisible (umode +i) -- no_oper_invis
* Far connection notices (snomask +F) -- sno_farconnect
* Remote oper up notices -- sno_globaloper
* Global nick-change notices -- sno_globalnickchange
* /whois notifications (snomask +W) -- sno_whois
* Oper-override (modehacking only) -- override
* Stop services kills -- no_kill_services
2007-01-25 06:40:21 +00:00
*/
2016-03-13 02:10:46 +00:00
#loadmodule "extensions/chm_adminonly";
2016-05-12 04:39:42 +00:00
#loadmodule "extensions/chm_nonotice";
2016-03-13 02:10:46 +00:00
#loadmodule "extensions/chm_operonly";
#loadmodule "extensions/chm_sslonly";
#loadmodule "extensions/chm_operpeace";
#loadmodule "extensions/createauthonly";
#loadmodule "extensions/extb_account";
#loadmodule "extensions/extb_canjoin";
#loadmodule "extensions/extb_channel";
#loadmodule "extensions/extb_combi";
#loadmodule "extensions/extb_extgecos";
#loadmodule "extensions/extb_hostmask";
#loadmodule "extensions/extb_oper";
#loadmodule "extensions/extb_realname";
#loadmodule "extensions/extb_server";
#loadmodule "extensions/extb_ssl";
2016-03-28 02:29:57 +00:00
#loadmodule "extensions/extb_usermode";
2016-03-13 02:10:46 +00:00
#loadmodule "extensions/helpops";
#loadmodule "extensions/hurt";
#loadmodule "extensions/ip_cloaking_4.0";
#loadmodule "extensions/ip_cloaking";
#loadmodule "extensions/m_extendchans";
#loadmodule "extensions/m_findforwards";
#loadmodule "extensions/m_identify";
2016-04-02 10:20:30 +00:00
#loadmodule "extensions/m_locops";
2016-03-13 02:10:46 +00:00
#loadmodule "extensions/no_oper_invis";
#loadmodule "extensions/sno_farconnect";
#loadmodule "extensions/sno_globalnickchange";
#loadmodule "extensions/sno_globaloper";
#loadmodule "extensions/sno_whois";
#loadmodule "extensions/override";
#loadmodule "extensions/no_kill_services";
2013-04-20 06:14:54 +00:00
2007-01-25 06:40:21 +00:00
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
/* name: the name of our server */
name = "hades.arpa";
/* sid: the unique server id of our server. This must be three
* characters long. The first character must be a digit [0-9], the
* remaining two chars may be letters [A-Z] or digits [0-9].
*
2007-08-09 06:47:26 +00:00
* This parameter must be specified for the server to start.
2007-01-25 06:40:21 +00:00
*/
sid = "42X";
/* description: the description of our server. '[' and ']' may not
* be used here for compatibility with older servers.
*/
description = "charybdis test server";
/* network info: the name and description of the network this server
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
/* vhost: the IP to bind to when we connect outward to ipv4 servers.
* This should be an ipv4 IP only.
*/
2013-10-06 17:39:06 +00:00
#vhost = "192.0.2.6";
2007-01-25 06:40:21 +00:00
/* vhost6: the IP to bind to when we connect outward to ipv6 servers.
* This should be an ipv6 IP only.
*/
2016-11-27 20:51:06 +00:00
#vhost6 = "2001:db8:2::6";
2016-03-29 14:09:52 +00:00
2016-05-05 04:15:46 +00:00
/* ssl_cert: certificate (and optionally key) for our ssl server */
2014-07-13 16:12:54 +00:00
ssl_cert = "etc/ssl.pem";
2008-04-07 11:45:15 +00:00
2016-05-05 04:15:46 +00:00
/* ssl_private_key: our ssl private key (if not contained in ssl_cert file) */
#ssl_private_key = "etc/ssl.key";
2016-05-05 04:18:31 +00:00
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048 */
/* If you do not provide parameters, some TLS backends will fail on DHE- ciphers,
and some will succeed but use weak, common DH groups! */
2008-04-07 11:45:15 +00:00
ssl_dh_params = "etc/dh.pem";
2015-12-12 13:50:48 +00:00
/* ssl_cipher_list: A list of ciphers, dependent on your TLS backend */
2021-02-01 15:51:59 +00:00
#ssl_cipher_list = "TLS_CHACHA20_POLY1305_SHA256:EECDH+HIGH:EDH+HIGH:HIGH:!aNULL";
2015-12-12 13:50:48 +00:00
2009-11-17 23:00:07 +00:00
/* ssld_count: number of ssld processes you want to start, if you
* have a really busy server, using N-1 where N is the number of
* cpu/cpu cores you have might be useful. A number greater than one
* can also be useful in case of bugs in ssld and because ssld needs
* two file descriptors per SSL connection.
2008-04-07 11:45:15 +00:00
*/
ssld_count = 1;
/* default max clients: the default maximum number of clients
* allowed to connect. This can be changed once ircd has started by
* issuing:
* /quote set maxclients <limit>
2007-03-05 18:58:38 +00:00
*/
2008-04-05 19:56:15 +00:00
default_max_clients = 1024;
2011-11-29 22:10:21 +00:00
2011-11-29 22:32:10 +00:00
/* nicklen: enforced nickname length (for this server only; must not
* be longer than the maximum length set while building).
*/
2011-11-29 22:10:21 +00:00
nicklen = 30;
2007-01-25 06:40:21 +00:00
};
/* admin {}: contains admin information about the server. (OLD A:) */
admin {
name = "Smurf target";
description = "Main Server Administrator";
email = "<syn@packets.r.us>";
};
/* log {}: contains information about logfiles. */
log {
/* logfiles: the logfiles to use for specific activity. if these
* paths are defined, then ircd will log to them, otherwise it wont.
*
* The confs are, in order:
* - userlog: user exits
* - fuserlog: failed user connections
* - operlog: /oper usage
* - foperlog: failed /oper usage
* - serverlog: server connects/disconnects
* - klinelog: klines, etc
* - killlog: kills
* - operspylog: operspy usage
* - ioerrorlog: IO errors
*/
fname_userlog = "logs/userlog";
#fname_fuserlog = "logs/fuserlog";
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
#fname_ioerrorlog = "logs/ioerror";
};
/* class {}: contain information about classes for users (OLD Y:) */
class "users" {
/* class name must go above */
/* ping time: how often a client must reply to a PING from the
* server before they are dropped.
*/
ping_time = 2 minutes;
2011-05-14 06:42:27 +00:00
/* number per ident: the number of users per user@host networkwide
* allowed to connect. Unidented connections are classified as
* the same ident.
*/
number_per_ident = 2;
2007-01-25 06:40:21 +00:00
/* number per ip: the number of local users per host allowed */
number_per_ip = 3;
2011-05-14 06:42:27 +00:00
/* number per ip global: the number of network wide connections
* per host allowed for a user, including connections to the
* local server.
*/
number_per_ip_global = 5;
2007-01-25 06:40:21 +00:00
2008-11-30 12:33:43 +00:00
/* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size
*/
cidr_ipv4_bitlen = 24;
/* cidr_ipv6_bitlen: Limits numbers of connections from a subnet size
2007-01-25 06:40:21 +00:00
* the following example makes the subnet /64 this is useful
* for IPv6 connections in particular
*/
2008-11-30 12:33:43 +00:00
cidr_ipv6_bitlen = 64;
2007-01-25 06:40:21 +00:00
2016-03-29 14:09:52 +00:00
/* number_per_cidr: Number of connections to allow from a subnet of the
2008-11-30 12:33:43 +00:00
* size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen.
* 4 seems to be a good default to me.
2007-01-25 06:40:21 +00:00
*/
number_per_cidr = 4;
/* max number: the maximum number of users allowed in this class */
max_number = 100;
/* sendq: the amount of data allowed in a clients queue before
* they are dropped.
*/
sendq = 100 kbytes;
};
class "restricted" {
ping_time = 1 minute 30 seconds;
number_per_ip = 1;
max_number = 100;
sendq = 60kb;
};
class "opers" {
ping_time = 5 minutes;
number_per_ip = 10;
max_number = 100;
sendq = 100kbytes;
};
class "server" {
ping_time = 5 minutes;
/* connectfreq: only used in server classes. specifies the delay
* between autoconnecting to servers.
*/
connectfreq = 5 minutes;
2020-10-11 13:54:24 +00:00
/* max_autoconn: the amount of servers to autoconnect to. if the number
2012-07-28 13:31:06 +00:00
* of servers in the class is or exceeds this, no more servers in the
* class are autoconnected. oper initiated connects are unaffected.
* this should usually be set to either 0 or 1. (autoconnecting from
* hubs to leaves may cause leaves to function as hubs by having
* multiple servers connected to them.)
*/
2020-10-11 13:54:24 +00:00
max_autoconn = 1;
2007-01-25 06:40:21 +00:00
2020-10-17 00:40:42 +00:00
/* max_number: the maximum number of servers allowed in this class */
max_number = 100;
2007-01-25 06:40:21 +00:00
/* sendq: servers need a higher sendq as they are sent more data */
2016-04-23 14:57:07 +00:00
sendq = 2 megabytes;
2007-01-25 06:40:21 +00:00
};
/* listen {}: contain information about the ports ircd listens on (OLD P:) */
listen {
2012-03-17 15:00:39 +00:00
/* defer_accept: wait for clients to send IRC handshake data before
* accepting them. if you intend to use software which depends on the
* server replying first, such as BOPM, you should disable this feature.
* otherwise, you probably want to leave it on.
*/
defer_accept = yes;
2007-01-25 06:40:21 +00:00
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
2016-03-29 14:09:52 +00:00
* sslport: the specific port to listen ssl connections on. if no
2008-04-07 11:45:15 +00:00
* host is specified before, it will listen on all available IPs.
*
2007-01-25 06:40:21 +00:00
* ports are seperated via a comma, a range may be specified using ".."
*/
2016-03-29 14:09:52 +00:00
2007-01-25 06:40:21 +00:00
/* port: listen on all available IPs, ports 5000 and 6665 to 6669 */
port = 5000, 6665 .. 6669;
2016-03-29 14:09:52 +00:00
2016-05-14 22:24:20 +00:00
/* sslport: listen for ssl connections on all available IPs, port 6697 */
sslport = 6697;
2007-01-25 06:40:21 +00:00
2016-03-29 14:09:52 +00:00
/* host: set a specific IP/host the ports after the line will listen
2007-01-25 06:40:21 +00:00
* on. This may be ipv4 or ipv6.
*/
2013-10-06 17:39:06 +00:00
host = "192.0.2.6";
2007-01-25 06:40:21 +00:00
port = 7000, 7001;
2008-04-07 11:45:15 +00:00
sslport = 9000, 9001;
2007-01-25 06:40:21 +00:00
2013-10-06 17:39:06 +00:00
host = "2001:db8:2::6";
2011-05-14 06:42:27 +00:00
port = 7002;
sslport = 9002;
2016-05-14 22:24:20 +00:00
/* wsock: listeners defined with this option enabled will be websocket listeners,
* and will not accept normal clients.
*/
wsock = yes;
sslport = 9999;
2007-01-25 06:40:21 +00:00
};
/* auth {}: allow users to connect to the ircd (OLD I:) */
auth {
2007-08-29 22:04:45 +00:00
/* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
* lines are permitted per auth block. This is matched against the
* hostname and IP address (using :: shortening for IPv6 and
* prepending a 0 if it starts with a colon) and can also use CIDR
* masks.
2007-01-25 06:40:21 +00:00
*/
2013-10-06 17:39:06 +00:00
user = "*@198.51.100.0/24";
user = "*test@2001:db8:1:*";
2007-01-25 06:40:21 +00:00
2012-06-01 00:26:52 +00:00
/* auth_user: This allows specifying a username:password instead of
* just a password in PASS, so that a fixed user@host is not
* necessary for a specific auth{} block.
*/
#auth_user = "SomeUser";
2007-01-25 06:40:21 +00:00
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* flags = ...; below if it is.
*/
password = "letmein";
2016-03-29 14:09:52 +00:00
2007-01-25 06:40:21 +00:00
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
2011-05-14 06:42:27 +00:00
spoof = "I.still.hate.packets";
2007-01-25 06:40:21 +00:00
/* Possible flags in auth:
2016-03-29 14:09:52 +00:00
*
2007-01-25 06:40:21 +00:00
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
2016-04-02 07:49:38 +00:00
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines,
* | dnsbls, and proxies
2007-01-25 06:40:21 +00:00
* dnsbl_exempt | exempt this user from dnsbls
2016-04-02 07:49:38 +00:00
* proxy_exempt | exempt this user from proxies
2007-01-25 06:40:21 +00:00
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
2011-05-14 06:42:27 +00:00
* flood_exempt | exempt this user from flood limits
* USE WITH CAUTION.
2007-01-25 06:40:21 +00:00
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
2008-09-06 23:18:58 +00:00
* need_ssl | require SSL/TLS for user in this class
2007-01-25 06:40:21 +00:00
* need_sasl | require SASL id for user in this class
2016-01-12 05:32:23 +00:00
* extend_chans | allow this user to join more channels than normal
2020-04-19 23:45:22 +00:00
* kline_spoof_ip | if this block has a spoof host, klines match only
* | the spoof and not the underlying IP
2007-01-25 06:40:21 +00:00
*/
flags = kline_exempt, exceed_limit;
2016-03-29 14:09:52 +00:00
2007-01-25 06:40:21 +00:00
/* class: the class the user is placed in */
class = "opers";
};
auth {
/* redirect: the server and port to redirect a user to. A user does
* not have to obey the redirection, the ircd just suggests to them
* an alternative server.
*/
2013-10-06 17:39:06 +00:00
redirserv = "irc.example.net";
2007-01-25 06:40:21 +00:00
redirport = 6667;
2016-03-29 14:09:52 +00:00
2013-10-06 17:39:06 +00:00
user = "*.example.com";
2007-01-25 06:40:21 +00:00
/* class: a class is required even though it is not used */
class = "users";
};
auth {
user = "*@*";
class = "users";
};
2008-09-12 22:32:22 +00:00
/* privset{}: defines operator privilege sets. */
privset "local_op" {
/* privs: controls the activities and commands an oper is
* allowed to do on the server
*
* Available options:
*
2019-07-07 04:34:28 +00:00
* oper:general: enable most general oper privileges that came
* with +o in older releases
2020-06-07 16:42:38 +00:00
* auspex:oper: allows the oper to see through oper hiding
* auspex:umodes: allows viewing other users' modes
* auspex:cmodes: shows privileged cmodes
* auspex:hostname: shows hidden hostnames/ips
* oper:privs: allows /stats o/O and seeing privset in /whois
2019-07-07 22:15:43 +00:00
* oper:testline: allows /testline and /testgecos
2020-10-24 22:49:28 +00:00
* oper:kill: allows local and remote users to be /KILL'd
2008-09-12 22:34:52 +00:00
* oper:routing: allows remote SQUIT and CONNECT
2008-09-12 22:32:22 +00:00
* oper:kline: allows KLINE and DLINE
* oper:unkline: allows UNKLINE and UNDLINE
* snomask:nick_changes: allows oper to see nickchanges via snomask +n
* oper:rehash: allows oper to REHASH config
* oper:die: allows DIE and RESTART
* oper:admin: gives admin privileges. admins
* may (un)load modules and see various
* additional information.
* oper:hidden_admin: gives admin privileges except
2020-06-07 16:42:38 +00:00
* will not have the admin lines in
* whois.
* oper:xline: allows use of /quote xline/unxline
* oper:resv: allows /quote resv/unresv
* oper:cmodes: allows cmode +LP
2008-09-12 22:32:22 +00:00
* oper:operwall: allows the oper to send/receive operwalls
2020-06-07 16:42:38 +00:00
* oper:spy: allows 'operspy' features to see through +s
* channels etc. see /quote help operspy
2008-09-12 22:32:22 +00:00
* oper:hidden: hides the oper from /stats p
* oper:remoteban: allows remote kline etc
2021-01-28 14:09:31 +00:00
* oper:mass_notice: allows sending mass notices
* oper:wallops: allows sending wallops messages
2020-06-07 16:42:38 +00:00
* oper:grant: allows using the GRANT command
2020-06-07 20:33:13 +00:00
* usermode:servnotice: allows setting +s
2021-04-26 16:24:36 +00:00
* oper:message: allows opers to bypass CALLERID (usermode +g)
2020-08-04 13:54:01 +00:00
*
* Privileges provided by extensions include:
*
* oper:dehelper: allows the DEHELPER command (from extensions/helpops)
* oper:override: enables oper override via umode +p (from extensions/override)
* oper:receive_immunity:
* confers the benefits of chmode +M (operpeace) (from extensions/chm_operpeace)
2020-10-26 23:48:23 +00:00
* usermode:helpops allows setting +h (from extensions/helpops)
2008-09-12 22:32:22 +00:00
*/
2021-04-26 16:24:36 +00:00
privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, oper:message,
usermode:servnotice, auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes;
2008-09-12 22:32:22 +00:00
};
privset "server_bot" {
/* extends: a privset to inherit in this privset */
extends = "local_op";
2008-12-28 22:24:43 +00:00
privs = oper:kline, oper:remoteban, snomask:nick_changes;
2008-09-12 22:32:22 +00:00
};
privset "global_op" {
extends = "local_op";
2020-10-24 22:49:28 +00:00
privs = oper:routing, oper:kline, oper:unkline, oper:xline,
2021-01-28 14:09:31 +00:00
oper:resv, oper:cmodes, oper:mass_notice, oper:wallops,
oper:remoteban;
2008-09-12 22:32:22 +00:00
};
privset "admin" {
extends = "global_op";
2016-01-12 05:02:03 +00:00
privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;
2008-09-12 22:32:22 +00:00
};
/* operator {}: defines ircd operators. (OLD O:) */
2007-01-25 06:40:21 +00:00
operator "god" {
/* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is*
* supported now. auth{} spoofs work here, other spoofs do not.
2011-05-14 06:42:27 +00:00
* multiple user="" lines are supported.
2007-01-25 06:40:21 +00:00
*/
user = "*god@*";
user = "*@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
2016-03-29 14:09:52 +00:00
* contained in flags = ...; this will need to be encrypted using
2007-01-25 06:40:21 +00:00
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
2016-03-29 14:09:52 +00:00
* A password should not be defined when this is used, see
2007-01-25 06:40:21 +00:00
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
2010-02-17 12:41:41 +00:00
/* fingerprint: if specified, the oper's client certificate
* fingerprint will be checked against the specified fingerprint
* below.
*/
#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
2007-01-25 06:40:21 +00:00
/* umodes: the specific umodes this oper gets when they oper.
* If this is specified an oper will not be given oper_umodes
* These are described above oper_only_umodes in general {};
*/
#umodes = locops, servnotice, operwall, wallop;
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
snomask = "+Zbfkrsuy";
2008-09-12 22:32:22 +00:00
/* flags: misc options for the operator. You may prefix an option
* with ~ to disable it, e.g. ~encrypted.
2007-01-25 06:40:21 +00:00
*
2008-09-12 22:32:22 +00:00
* Default flags are encrypted.
2007-01-25 06:40:21 +00:00
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
2008-09-06 23:18:58 +00:00
* need_ssl: must be using SSL/TLS to oper up
2011-05-14 06:42:27 +00:00
*/
2008-09-12 22:32:22 +00:00
flags = encrypted;
/* privset: privileges set to grant */
privset = "admin";
2007-01-25 06:40:21 +00:00
};
/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
connect "irc.uplink.com" {
/* the name must go above */
/* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
2013-10-06 17:39:06 +00:00
host = "203.0.113.3";
2007-01-25 06:40:21 +00:00
/* vhost: the host or IP to bind to for this connection. If this
* is not specified, the default vhost (in serverinfo {}) is used.
*/
2013-10-06 17:39:06 +00:00
#vhost = "192.0.2.131";
2007-01-25 06:40:21 +00:00
/* passwords: the passwords we send (OLD C:) and accept (OLD N:).
* The remote server will have these passwords reversed.
*/
send_password = "password";
accept_password = "anotherpassword";
2017-11-04 07:40:44 +00:00
/* fingerprint: if flags = ssl is specified, the server's
* certificate fingerprint will be checked against the fingerprint
* specified below. required if using flags = ssl.
2010-12-14 05:14:00 +00:00
*/
#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
2007-01-25 06:40:21 +00:00
/* port: the port to connect to this server on */
port = 6666;
/* class: the class this server is in */
class = "server";
/* flags: controls special options for this server
* encrypted - marks the accept_password as being crypt()'d
* autoconn - automatically connect to this server
* compressed - compress traffic via ziplinks
* topicburst - burst topics between servers
2008-04-07 11:45:15 +00:00
* ssl - ssl/tls encrypted server connections
2016-09-16 22:18:55 +00:00
* no-export - marks the link as a no-export link (not exported to other links)
2007-01-25 06:40:21 +00:00
*/
flags = compressed, topicburst;
};
2016-03-13 02:27:37 +00:00
connect "ipv6.lame.server" {
2016-04-24 16:05:05 +00:00
host = "192.0.2.1";
2013-10-06 17:39:06 +00:00
host = "2001:db8:3::8";
2011-05-14 06:42:27 +00:00
send_password = "password";
accept_password = "password";
port = 6666;
2007-01-25 06:40:21 +00:00
2016-04-24 16:05:05 +00:00
/* aftype: controls whether the outgoing connection uses "ipv4" or "ipv6".
* Default is to try either at random.
2007-01-25 06:40:21 +00:00
*/
aftype = ipv6;
2011-05-14 06:42:27 +00:00
class = "server";
2007-01-25 06:40:21 +00:00
};
2008-04-07 11:45:15 +00:00
connect "ssl.uplink.com" {
/* Example of ssl server-to-server connection, ssl flag doesn't need
* compressed flag, 'cause it uses own compression
*/
2013-10-06 17:39:06 +00:00
host = "203.0.113.129";
2008-04-07 11:45:15 +00:00
send_password = "password";
accept_password = "anotherpassword";
port = 9999;
class = "server";
flags = ssl, topicburst;
};
2020-10-31 15:03:46 +00:00
/* cluster {}; servers that we propagate things to automatically. */
2007-01-25 06:40:21 +00:00
cluster {
/* name: the server to share with, this can be a wildcard and may be
* stacked.
*/
/* flags: list of what to share, all the name lines above this (up
* until another flags entry) will receive these flags.
*
* kline - share perm klines
* tkline - share temp klines
* unkline - share unklines
* locops - share locops
* xline - share perm xlines
* txline - share temp xlines
* unxline - share unxlines
* resv - share perm resvs
* tresv - share temp resvs
* unresv - share unresvs
* all - share all of the above
*/
2016-03-13 02:27:37 +00:00
/* share klines/unklines/xlines with *.lan */
name = "*.lan";
2007-01-25 06:40:21 +00:00
flags = kline, unkline, xline;
/* share locops with irc.ircd-ratbox.org and ircd.ircd-ratbox.org */
name = "irc.ircd-ratbox.org";
name = "ircd.ircd-ratbox.org";
flags = locops;
};
/* service{}: privileged servers (services). These servers have extra
* privileges such as setting login names on users and introducing clients
2020-10-31 15:03:46 +00:00
* with umode +S (unkickable, hide channels, etc).
2007-01-25 06:40:21 +00:00
* Do not place normal servers here.
* There may be only one service{} block.
*/
service {
/* name: the server name. These may be stacked. */
name = "services.int";
};
2007-05-18 20:31:33 +00:00
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
2007-01-25 06:40:21 +00:00
exempt {
2013-10-06 17:39:06 +00:00
ip = "192.0.2.0/24";
2007-01-25 06:40:21 +00:00
/* these may be stacked */
ip = "127.0.0.1";
};
2020-10-28 20:58:10 +00:00
/* secure {}: IPs that are considered to be secure networks, and get
* +Z without using TLS */
secure {
ip = "127.0.0.1";
};
2007-01-25 06:40:21 +00:00
/* The channel block contains options pertaining to channels */
channel {
/* invex: Enable/disable channel mode +I, a n!u@h list of masks
* that can join a +i channel without an invite.
*/
use_invex = yes;
/* except: Enable/disable channel mode +e, a n!u@h list of masks
* that can join a channel through a ban (+b).
*/
use_except = yes;
2011-09-25 14:22:29 +00:00
/* forward: Enable/disable channel mode +f, a channel to forward
* users to if they can't join because of +i etc. Also enables ban
* forwarding, <mask>$<channel>.
*/
use_forward = yes;
2007-01-25 06:40:21 +00:00
/* knock: Allows users to request an invite to a channel that
* is locked somehow (+ikl). If the channel is +p or you are banned
* the knock will not be sent.
*/
use_knock = yes;
/* knock delay: The amount of time a user must wait between issuing
* the knock command.
*/
knock_delay = 5 minutes;
/* knock channel delay: How often a knock to any specific channel
* is permitted, regardless of the user sending the knock.
*/
knock_delay_channel = 1 minute;
/* max chans: The maximum number of channels a user can join/be on. */
max_chans_per_user = 15;
2016-01-12 05:32:23 +00:00
/* max chans (large): The extended maximum number of channels a user can join. */
max_chans_per_user_large = 60;
2011-05-14 06:42:27 +00:00
/* max bans: maximum number of +b/e/I/q modes in a channel */
max_bans = 100;
2007-01-25 06:40:21 +00:00
2011-05-14 06:42:27 +00:00
/* max bans: maximum number of +b/e/I/q modes in a +L channel */
max_bans_large = 500;
2007-01-25 06:40:21 +00:00
2011-05-14 06:42:27 +00:00
/* splitcode: split users, split servers and either no join on split
2007-01-25 06:40:21 +00:00
* or no create on split must be enabled for split checking.
* splitmode will be entered on either split users or split servers
* dropping below the limit.
*
* you may force splitmode to be permanent by /quote set splitmode on
*/
/* split users: when the usercount is lower than this level, consider
* ourselves split. this must be set for automatic splitmode
*/
default_split_user_count = 0;
/* split servers: when the amount of servers that have acknowledged
2016-03-29 14:09:52 +00:00
* theyve finished bursting is lower than this, consider ourselves
2007-01-25 06:40:21 +00:00
* split. this must be set for automatic splitmode
*/
default_split_server_count = 0;
/* split: no create: disallow users creating channels on split */
no_create_on_split = no;
/* split: no join: disallow users joining channels at all on a split */
no_join_on_split = no;
/* burst topicwho: when bursting topics, also burst the topic setter */
burst_topicwho = yes;
/* kick on split riding: kick users riding splits to join +i or +k
* channels. more precisely, if a bursting server sends an SJOIN
* for a channel with a lower TS with either a +i mode or a +k
* mode with a different key, kick all local users.
*
* note: this does not take +r, +b, +e and +I into account.
*/
kick_on_split_riding = no;
2009-02-21 23:12:21 +00:00
/* only ascii channels: disable local users joining channels
* containing characters outside the range 33-126 (non-printable
* or non-ASCII).
*/
only_ascii_channels = no;
2011-05-14 06:42:27 +00:00
2009-09-19 19:24:35 +00:00
/* resv_forcepart: force any local users to part a channel
* when a RESV is issued.
*/
resv_forcepart = yes;
2010-08-28 23:26:00 +00:00
/* channel target change: restrict how many channels users can
* message per unit of time. IRC operators, channel operators and
* voiced users are exempt.
*/
channel_target_change = yes;
2010-12-21 20:38:04 +00:00
/* disable local channels: if yes, then local channels will not be
* supported.
*/
disable_local_channels = no;
2015-12-11 21:36:53 +00:00
/* autochanmodes: the channel modes that should be automatically set
* when a channel is created.
*/
autochanmodes = "+nt";
2015-12-27 04:23:28 +00:00
/* displayed_usercount: the minimum amount of users on a channel before it
* is displayed in LIST. this parameter can be overridden using ELIST parameters,
* such as LIST >0.
*/
displayed_usercount = 3;
2016-01-13 23:03:40 +00:00
/* strip_topic_colors: whether or not color codes in TOPIC should be stripped. */
strip_topic_colors = no;
2018-02-27 22:49:13 +00:00
/* opmod_send_statusmsg: format messages sent to ops due to +z
* as PRIVMSG @#channel when sent to clients.
*/
opmod_send_statusmsg = no;
2021-04-24 11:15:20 +00:00
/* ip_bans_through_vhost: should channel IP bans see through dynamic spoofed hosts? */
ip_bans_through_vhost = yes;
2007-01-25 06:40:21 +00:00
};
/* The serverhide block contains the options regarding serverhiding */
serverhide {
2007-11-23 20:51:00 +00:00
/* flatten links: this option will hide various routing information
* and make all servers in /links appear that they are linked to
* this server.
2007-01-25 06:40:21 +00:00
*/
flatten_links = no;
2007-11-23 21:11:25 +00:00
/* links delay: how long to wait before showing splits or new
* servers in a flattened /links output.
2007-01-25 06:40:21 +00:00
*/
links_delay = 5 minutes;
2007-11-23 20:51:00 +00:00
/* hidden: hide this server from a /links output on servers with
* flatten_links enabled. this allows hub servers to be hidden etc.
2007-01-25 06:40:21 +00:00
*/
2011-05-14 06:42:27 +00:00
hidden = no;
2007-01-25 06:40:21 +00:00
/* disable hidden: prevent servers hiding themselves from a
* /links ouput.
*/
disable_hidden = no;
};
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
2009-10-18 19:08:37 +00:00
* They are used in pairs of one host/rejection reason.
2007-01-25 06:40:21 +00:00
*
2016-04-01 08:45:45 +00:00
* These settings should be adequate for most networks.
2007-01-25 06:40:21 +00:00
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
*
2007-01-25 07:08:21 +00:00
* As of charybdis 2.2, you can do some keyword substitution on the rejection
* reason. The available keyword substitutions are:
*
* ${ip} - the user's IP
* ${host} - the user's canonical hostname
* ${dnsbl-host} - the dnsbl hostname the lookup was done against
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
2011-02-27 21:38:05 +00:00
* As of charybdis 3.4, a type parameter is supported, which specifies the
* address families the blacklist supports. IPv4 and IPv6 are supported.
* IPv4 is currently the default as few blacklists support IPv6 operation
* as of this writing.
*
2013-04-20 21:17:29 +00:00
* As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
* is considered a match. If included, a comma-separated list of *quoted*
* strings is allowed to match queries. They may be of the format "0" to "255"
* to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
* an A record. The blacklist is only applied if it matches anything in the
2013-04-21 01:52:34 +00:00
* list. You may freely mix full IP's and final octets.
2016-03-29 14:09:52 +00:00
*
2013-04-21 01:52:34 +00:00
* Consult your blacklist provider for the meaning of these parameters; they
* are usually used to denote different ban types.
2007-01-25 06:40:21 +00:00
*/
2007-05-27 05:35:06 +00:00
blacklist {
2010-05-14 13:49:26 +00:00
host = "rbl.efnetrbl.org";
2011-02-27 21:38:05 +00:00
type = ipv4;
2010-05-14 13:49:26 +00:00
reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
2007-05-27 05:35:06 +00:00
2013-04-20 21:17:29 +00:00
/* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
2011-02-27 21:38:05 +00:00
# host = "foobl.blacklist.invalid";
2013-04-20 21:17:29 +00:00
# matches = "4", "6", "127.0.0.10";
2011-02-27 21:38:05 +00:00
# type = ipv4, ipv6;
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
2007-05-27 05:35:06 +00:00
};
2007-01-25 06:40:21 +00:00
2016-04-01 09:11:04 +00:00
/* These are the OPM settings.
* This is similar to the functionality provided by BOPM. It will scan incoming
* connections for open proxies by connecting to clients and attempting several
* different open proxy handshakes. If they connect back to us (via a dedicated
* listening port), and send back the data we send them, they are considered
* an open proxy. For politeness reasons (users may be confused by the incoming
* connection attempts if they are logging incoming connections), the user is
* notified upon connect if they are being scanned.
*
* WARNING:
2016-04-03 04:42:23 +00:00
* These settings are considered experimental. Only the most common proxy types
* are checked for (Charybdis is immune from POST and GET proxies). If you are
2016-12-28 23:41:32 +00:00
* not comfortable with experimental code, do not use this feature.
2016-04-01 09:11:04 +00:00
*/
2016-12-28 23:41:32 +00:00
#opm {
2016-04-01 09:11:04 +00:00
/* IPv4 address to listen on. This must be a publicly facing IP address
* to be effective.
* If omitted, it defaults to serverinfo::vhost.
*/
#listen_ipv4 = "127.0.0.1";
/* IPv4 port to listen on.
* This should not be the same as any existing listeners.
*/
2019-06-16 08:02:51 +00:00
#port_v4 = 32000;
2016-04-01 09:11:04 +00:00
/* IPv6 address to listen on. This must be a publicly facing IP address
* to be effective.
* If omitted, it defaults to serverinfo::vhost6.
*/
2016-04-24 16:05:05 +00:00
#listen_ipv6 = "::1";
2016-04-01 09:11:04 +00:00
/* IPv6 port to listen on.
* This should not be the same as any existing listeners.
*/
2019-06-16 08:02:51 +00:00
#port_v6 = 32000;
2016-04-01 09:11:04 +00:00
2016-04-03 00:53:02 +00:00
/* You can also set the listen_port directive which will set both the
* IPv4 and IPv6 ports at once.
2016-04-01 09:11:04 +00:00
*/
2016-12-28 23:41:32 +00:00
#listen_port = 32000;
2016-04-02 07:29:48 +00:00
2016-04-02 08:33:12 +00:00
/* This sets the timeout in seconds before ending open proxy scans.
* Values less than 1 or greater than 60 are ignored.
* It is advisable to keep it as short as feasible, so clients do not
* get held up by excessively long scan times.
*/
2016-12-28 23:41:32 +00:00
#timeout = 5;
2016-04-02 08:33:12 +00:00
2016-04-02 07:29:48 +00:00
/* These are the ports to scan for SOCKS4 proxies on. They may overlap
* with other scan types. Sensible defaults are given below.
*/
2016-12-28 23:41:32 +00:00
#socks4_ports = 80, 443, 1080, 8000, 8080, 10800;
2016-04-02 07:29:48 +00:00
/* These are the ports to scan for SOCKS5 proxies on. They may overlap
* with other scan types. Sensible defaults are given below.
*/
2016-12-28 23:41:32 +00:00
#socks5_ports = 80, 443, 1080, 8000, 8080, 10800;
2016-04-02 08:11:12 +00:00
2016-04-02 23:37:59 +00:00
/* These are the ports to scan for HTTP CONNECT proxies on (plaintext).
2016-04-02 08:11:12 +00:00
* They may overlap with other scan types. Sensible defaults are given
* below.
*/
2016-12-28 23:41:32 +00:00
#httpconnect_ports = 80, 8080, 8000;
2016-04-02 23:37:59 +00:00
/* These are the ports to scan for HTTPS CONNECT proxies on (SSL).
* They may overlap with other scan types. Sensible defaults are given
* below.
*/
2016-12-28 23:41:32 +00:00
#httpsconnect_ports = 443, 4443;
#};
2016-04-01 09:11:04 +00:00
2007-01-25 06:40:21 +00:00
/*
* Alias blocks allow you to define custom commands. (Old m_sshortcut.c)
* They send PRIVMSG to the given target. A real command takes
* precedence above an alias.
*/
alias "NickServ" {
/* the name must go above */
/* target: the target nick (must be a network service) or
* user@server (cannot be this server, only opers can use
* user starting with "opers" reliably, interpreted on the target
* server only so you may need to use nick@server instead)
*/
target = "NickServ";
};
alias "ChanServ" {
target = "ChanServ";
};
alias "OperServ" {
target = "OperServ";
};
alias "MemoServ" {
target = "MemoServ";
};
alias "NS" {
target = "NickServ";
};
alias "CS" {
target = "ChanServ";
};
alias "OS" {
target = "OperServ";
};
alias "MS" {
target = "MemoServ";
};
/* The general block contains many of the options that were once compiled
* in options in config.h. The general block is read at start time.
*/
general {
/* hide error messages: defines whether error messages from
2007-12-28 00:31:56 +00:00
* servers that are not deemed fully safe are hidden or not.
* These can sometimes contain IPs and can have an adverse
* effect on server ip hiding. Set to:
2007-01-25 06:40:21 +00:00
* yes: hide from opers and admin
* opers: hide from opers only
* no: do not hide error messages
2007-12-28 00:31:56 +00:00
* Admins on other servers count as opers.
2007-01-25 06:40:21 +00:00
*/
hide_error_messages = opers;
/* hide spoof ips: hide the real ips of auth{} spoofed users
* If disabled, local opers can see them.
* Dynamic spoofs (e.g. set by services) are unaffected by this;
* any oper (local and remote) can see the real ip.
*/
hide_spoof_ips = yes;
/* default umodes: umodes to set upon connection
* If you have enabled the ip_cloaking extension, and you wish for
2010-02-18 13:34:40 +00:00
* incoming clients to be set +h or +x upon connection, add +h or +x to the umode
2007-01-25 06:40:21 +00:00
* string below.
*/
default_umodes = "+i";
/* default operstring: defines the default oper response
* in /whois queries, eg "is an IRC Operator".
* After startup use /quote set operstring to change.
*/
default_operstring = "is an IRC Operator";
/* default adminstring: defines the default admin response
* in /whois queries, eg "is a Server Administrator".
* After startup use /quote set adminstring to change.
*/
default_adminstring = "is a Server Administrator";
/* servicestring: defines the response for opered services (+S)
* in /whois queries, eg "is a Network Service".
* This is updated on rehash.
*/
servicestring = "is a Network Service";
2015-02-14 09:41:10 +00:00
/*
* Nick of the network's SASL agent. Used to check whether services are here,
* SASL credentials are only sent to its server. Needs to be a service.
*
* Defaults to SaslServ if unspecified.
*/
sasl_service = "SaslServ";
2007-01-25 06:40:21 +00:00
/* disable fake channels: disable local users joining fake versions
* of channels, eg #foo^B^B. Disables bold, mirc colour, reverse,
* underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively).
*/
disable_fake_channels = no;
2011-05-14 06:42:27 +00:00
/* tkline_expire_notices: give a notice to opers when a tkline
* expires
*/
tkline_expire_notices = no;
2007-01-25 06:40:21 +00:00
/* floodcount: the default value of floodcount that is configurable
* via /quote set floodcount. This is the amount of lines a user
* may send to any other user/channel in one second.
*/
2011-05-14 06:42:27 +00:00
default_floodcount = 10;
2007-01-25 06:40:21 +00:00
2016-03-29 14:09:52 +00:00
/* failed oper notice: send a notice to all opers on the server when
2007-01-25 06:40:21 +00:00
* someone tries to OPER and uses the wrong password, host or ident.
*/
failed_oper_notice = yes;
/* dots in ident: the amount of '.' characters permitted in an ident
* reply before the user is rejected.
*/
2016-04-23 14:57:07 +00:00
dots_in_ident = 2;
2007-01-25 06:40:21 +00:00
2011-05-14 06:42:27 +00:00
/* min nonwildcard: the minimum non wildcard characters in k/d/g lines
2007-01-25 06:40:21 +00:00
* placed via the server. klines hand placed are exempt from limits.
* wildcard chars: '.' '*' '?' '@'
*/
min_nonwildcard = 4;
/* min nonwildcard simple: the minimum non wildcard characters in
* xlines/resvs placed via the server.
* wildcard chars: '*' '?'
*/
min_nonwildcard_simple = 3;
2011-05-14 06:42:27 +00:00
/* max accept: maximum allowed /accept's for +g usermode */
max_accept = 20;
2007-01-25 06:40:21 +00:00
2015-10-15 22:12:11 +00:00
/* max monitor: the maximum amount of nicknames a client may have in
* their monitor (server-side notify) list.
*/
max_monitor = 100;
2007-01-25 06:40:21 +00:00
/* nick flood: enable the nickflood control code */
anti_nick_flood = yes;
/* nick flood: the nick changes allowed in the specified period */
max_nick_time = 20 seconds;
max_nick_changes = 5;
2011-05-14 06:42:27 +00:00
/* anti spam time: the minimum time a user must be connected before
2007-01-25 06:40:21 +00:00
* custom quit messages are allowed.
*/
2011-05-14 06:42:27 +00:00
anti_spam_exit_message_time = 5 minutes;
2007-01-25 06:40:21 +00:00
/* ts delta: the time delta allowed between server clocks before
* a warning is given, or before the link is dropped. all servers
* should run ntpdate/rdate to keep clocks in sync
*/
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
2013-01-01 17:07:37 +00:00
/* client exit: prepend a user's quit message with "Quit: " */
2007-01-25 06:40:21 +00:00
client_exit = yes;
/* collision fnc: change user's nick to their UID instead of
* killing them, if possible. This setting only applies to nick
* collisions detected on this server. Only enable this if
* all servers on the network allow remote nicks to start with
* a digit.
*/
collision_fnc = yes;
2012-03-25 01:34:45 +00:00
/* resv fnc: change a user's nick to a nick they have recently used
* (or their UID, if no such nick can be found) when a resv matching
* them is set by services. Only enable this if all servers on the
* network allow remote nicks to start with a digit.
*/
resv_fnc = yes;
2007-01-25 06:40:21 +00:00
/* global snotices: send out certain snotices (most +b, +f, +y,
* some +s) to other servers via ENCAP SNOTE. Received SNOTEs are
* displayed unconditionally.
*/
global_snotices = yes;
2016-03-29 14:09:52 +00:00
/* dline reason: show the user the dline reason when they connect
2007-01-25 06:40:21 +00:00
* and are dlined.
*/
dline_with_reason = yes;
2016-03-29 14:09:52 +00:00
/* kline reason: show the user the reason why they are k/dlined
2007-01-25 06:40:21 +00:00
* on exit. may give away who set k/dline when set via tcm.
*/
kline_with_reason = yes;
2019-12-31 01:50:24 +00:00
/* tkline duration: when showing users their k/dline reason (see
* kline_with_reason), don't add "Temporary K-line 123 min."
*/
hide_tkdline_duration = no;
2007-01-25 06:40:21 +00:00
/* kline reason: make the users quit message on channels this
* reason instead of the oper's reason.
*/
kline_reason = "Connection closed";
/* identify to services via server password
* if auth{} block had no password but the user specified a
* server password anyway, send a PRIVMSG to <identify_service>
* with as text <identify_command> <password>.
*/
identify_service = "NickServ@services.int";
identify_command = "IDENTIFY";
/* non redundant klines: flag and ignore redundant klines */
non_redundant_klines = yes;
/* warn no nline: warn opers about servers that try to connect but
2016-03-29 14:09:52 +00:00
* we dont have a connect {} block for. Twits with misconfigured
2007-01-25 06:40:21 +00:00
* servers can get really annoying with this enabled.
*/
warn_no_nline = yes;
2010-03-27 15:13:57 +00:00
/* use propagated bans: KLINE, XLINE and RESV set fully propagated bans.
2010-03-16 22:05:50 +00:00
* That means the bans are part of the netburst and restarted/split
* servers will get them, but they will not apply to 3.2 and older
* servers at all.
2010-03-14 16:21:20 +00:00
*/
use_propagated_bans = yes;
2007-01-25 06:40:21 +00:00
/* stats e disabled: disable stats e. useful if server ips are
* exempted and you dont want them listing on irc.
*/
stats_e_disabled = no;
/* stats c oper only: make stats c (connect {}) oper only */
2016-04-23 14:57:07 +00:00
stats_c_oper_only = no;
2007-01-25 06:40:21 +00:00
/* stats y oper only: make stats y (class {}) oper only */
2016-04-23 14:57:07 +00:00
stats_y_oper_only = no;
2007-01-25 06:40:21 +00:00
/* stats o oper only: make stats o (opers) oper only */
2016-04-23 14:57:07 +00:00
stats_o_oper_only = yes;
2007-01-25 06:40:21 +00:00
/* stats P oper only: make stats P (ports) oper only
2016-03-29 14:09:52 +00:00
* NOTE: users doing stats P will never be given the ips that the
2007-01-25 06:40:21 +00:00
* server listens on, simply the ports.
*/
2016-04-23 14:57:07 +00:00
stats_P_oper_only = no;
2007-01-25 06:40:21 +00:00
/* stats i oper only: make stats i (auth {}) oper only. set to:
* yes: show users no auth blocks, made oper only.
* masked: show users first matching auth block
* no: show users all auth blocks.
*/
2016-04-23 14:57:07 +00:00
stats_i_oper_only = masked;
2007-01-25 06:40:21 +00:00
/* stats k/K oper only: make stats k/K (klines) oper only. set to:
* yes: show users no auth blocks, made oper only
* masked: show users first matching auth block
* no: show users all auth blocks.
*/
2016-04-23 14:57:07 +00:00
stats_k_oper_only = masked;
2007-01-25 06:40:21 +00:00
2020-11-08 17:40:01 +00:00
/* stats l/L oper only:
* yes: non-opers can't use this at all
* self: non-opers see only themselves
* no: show targeted users or non-hidden opers to everyone
*/
stats_l_oper_only = self;
2011-05-14 06:42:27 +00:00
/* map oper only: make /map oper only */
map_oper_only = no;
2007-01-25 06:40:21 +00:00
/* operspy admin only: make operspy notices to +Z admin only */
operspy_admin_only = no;
/* operspy dont care user info: treat /who mask as if there was
* an '!' always; do not log or server notice about operspy
* /who mask, /masktrace and /scan. channel information is still
* protected. */
operspy_dont_care_user_info = no;
/* caller id wait: time between notifying a +g user that somebody
* is messaging them.
*/
caller_id_wait = 1 minute;
/* pace wait simple: time between use of less intensive commands
* (HELP, remote WHOIS, WHOWAS)
*/
pace_wait_simple = 1 second;
/* pace wait: time between more intensive commands
* (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
*/
pace_wait = 10 seconds;
/* short motd: send clients a notice telling them to read the motd
* instead of forcing a motd to clients who may simply ignore it.
*/
short_motd = no;
/* ping cookies: require clients to respond exactly to a ping command,
* can help block certain types of drones and FTP PASV mode spoofing.
*/
ping_cookie = no;
/* connect timeout: sets how long we should wait for a connection
* request to succeed
*/
connect_timeout = 30 seconds;
2010-04-05 19:28:44 +00:00
/* ident timeout: Amount of time (in seconds) that the IRCd will
* wait for a user to respond to an ident request.
*/
2010-04-05 20:29:11 +00:00
default_ident_timeout = 5;
2010-04-05 19:28:44 +00:00
2007-01-25 06:40:21 +00:00
/* disable auth: disables identd checking */
disable_auth = no;
/* no oper flood: increase flood limits for opers. */
no_oper_flood = yes;
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
2016-03-29 14:09:52 +00:00
/* max targets: the maximum amount of targets in a single
2007-01-25 06:40:21 +00:00
* PRIVMSG/NOTICE. set to 999 NOT 0 for unlimited.
*/
max_targets = 4;
2010-01-13 23:54:49 +00:00
/* post-registration delay: wait this long before processing commands from a newly
* registered user. Used to allow network utility bots to perform any actions
* (such as host changes or proxy scanning) before the user can join channels.
*/
post_registration_delay = 2 seconds;
2011-05-14 06:42:27 +00:00
/* use_whois_actually: send clients requesting a whois a numeric
* giving the real IP of non-spoofed clients to prevent DNS abuse.
*/
use_whois_actually = yes;
2007-01-25 06:40:21 +00:00
/* usermodes configurable: a list of usermodes for the options below
*
2020-10-21 12:12:44 +00:00
* +g - callerid - Server-side private message allow list
2007-01-25 06:40:21 +00:00
* +D - deaf - Don't see channel messages
2016-03-29 14:09:52 +00:00
* +i - invisible - Not shown in NAMES or WHO unless you share a
2007-01-25 06:40:21 +00:00
* a channel
* +l - locops - See LOCOPS messages
* +Q - noforward - Unaffected by channel forwarding
* +R - regonlymsg - No messages from unindentified
* +s - servnotice - See server notices
* +w - wallop - See oper and server generated WALLOPS
* +z - operwall - See operwalls
*/
2016-03-29 14:09:52 +00:00
2007-01-25 06:40:21 +00:00
/* oper only umodes: usermodes only opers may set */
oper_only_umodes = operwall, locops, servnotice;
/* oper umodes: default usermodes opers get when they /oper */
oper_umodes = locops, servnotice, operwall, wallop;
/* oper snomask: default snomask opers get when they /oper,
* provided they have umode +s set */
oper_snomask = "+s";
/* compression level: level of compression for compressed links between
2016-03-29 14:09:52 +00:00
* servers.
2007-01-25 06:40:21 +00:00
*
* values are between: 1 (least compression, fastest)
* and: 9 (most compression, slowest).
*/
#compression_level = 6;
2011-05-14 06:42:27 +00:00
/* burst_away: This enables bursting away messages to servers.
* With this disabled, we will only propogate AWAY messages
* as users send them, but never burst them. Be warned though
* enabling this could increase the size of a burst significantly
* for a large network, like EFnet.
*/
burst_away = yes;
2007-01-25 06:40:21 +00:00
/* nick delay: This locks nicks of split clients for the given time
* or until a remote client uses the nick. This significantly
* reduces nick collisions on short splits but it can be annoying.
* To make things as fair as possible, this should be the same on
* all servers. If you enable this, the suggested value is 15 minutes.
*/
nick_delay = 0 seconds;
/* reject time: the amount of rejections through klines/dlines etc
* allowed in the given time before the rejection is cached and
* a pseudo temp dline is placed
*/
reject_ban_time = 1 minute;
reject_after_count = 3;
/* reject duration: the amount of time to cache the rejection */
reject_duration = 5 minutes;
2007-05-14 22:21:16 +00:00
2008-07-31 23:59:08 +00:00
/* throttle_duration: Amount of time that throttling will be applied to an IP
* address.
2007-05-14 22:21:16 +00:00
*/
2008-07-31 23:59:08 +00:00
throttle_duration = 60;
/* throttle_count: Number of connections within throttle_duration that it takes
* for throttling to take effect */
throttle_count = 4;
2011-03-27 20:35:26 +00:00
2011-05-14 06:42:27 +00:00
/* client flood_max_lines: maximum number of lines in a clients queue before
* they are dropped for flooding.
*/
client_flood_max_lines = 20;
/* Flood control settings. DO NOT CHANGE THESE without extensive discussion
* and testing by someone who knows exactly what they do.
*
* These settings replicate charybdis-3.3 behaviour.
*/
client_flood_burst_rate = 40;
client_flood_burst_max = 5;
client_flood_message_time = 1;
client_flood_message_num = 2;
2012-02-18 03:54:44 +00:00
/* max_ratelimit_tokens: the maximum number of ratelimit tokens that one
* user can accumulate. This attempts to limit the amount of outbound
* bandwidth one user can consume. Do not change unless you know what
* you're doing.
*/
max_ratelimit_tokens = 30;
2012-02-18 15:32:57 +00:00
/* away_interval: the minimum interval between AWAY commands. One
* additional AWAY command is allowed, and only marking as away
* counts.
*/
away_interval = 30;
2015-12-07 07:49:30 +00:00
/* certfp_method: the method that should be used for computing certificate fingerprints.
2016-04-23 21:51:05 +00:00
* Acceptable options are sha1, sha256, spki_sha256, sha512 and spki_sha512. Networks
* running versions of charybdis prior to charybdis 3.5 MUST use sha1 for certfp_method.
*
* The spki_* variants operate on the SubjectPublicKeyInfo of the certificate, which does
* not change unless the private key is changed. This allows the fingerprint to stay
2016-04-25 19:12:27 +00:00
* constant even if the certificate is reissued. These fingerprints will be prefixed with
2016-07-16 05:41:49 +00:00
* "SPKI:SHA2-256:" or "SPKI:SHA2-512:" depending on the hash type. These fingerprints
2016-11-15 12:36:01 +00:00
* are not supported on servers running charybdis 3.5.3 or earlier.
2016-07-16 05:41:49 +00:00
*
* To generate a fingerprint from a certificate file, please use the mkfingerprint utility
* program located in the bin/ subdirectory of your IRCd installation. Running it with no
* arguments will give you a brief usage message; it takes method and filename arguments.
2015-12-07 07:49:30 +00:00
*/
2016-04-25 22:52:18 +00:00
certfp_method = spki_sha256;
2016-01-15 19:38:40 +00:00
/* hide_opers_in_whois: if set to YES, then oper status will be hidden in /WHOIS output. */
hide_opers_in_whois = no;
2020-07-05 20:05:18 +00:00
/* tls_ciphers_oper_only: show the TLS cipher string in /WHOIS only to opers and self */
tls_ciphers_oper_only = no;
2020-11-08 03:52:18 +00:00
/* hidden_caps: client capabilities we'll pretend we don't support until they're requested */
#hidden_caps = "userhost-in-names";
2020-11-18 14:29:08 +00:00
/* oper_secure_only: require TLS on any connection trying to oper up */
oper_secure_only = no;
2007-01-25 06:40:21 +00:00
};
modules {
2016-03-29 14:09:52 +00:00
/* module path: paths to search for modules specified below and
2007-01-25 06:40:21 +00:00
* in /modload.
*/
path = "/usr/local/ircd/modules";
path = "/usr/local/ircd/modules/autoload";
/* module: the name of a module to load on startup/rehash */
2016-03-13 02:10:46 +00:00
#module = "some_module";
2007-01-25 06:40:21 +00:00
};
