Commit graph

1575 commits

Author SHA1 Message Date
Jilles Tjoelker
cf5337395c Rerun autoconf. 2011-11-29 23:41:30 +01:00
Jilles Tjoelker
ca8ff4830b Force nicklen (all flavours) to be at least 9. 2011-11-29 23:41:18 +01:00
Jilles Tjoelker
b225bf93b7 Change default --with-nicklen to 31, like atheme-services. 2011-11-29 23:32:10 +01:00
William Pitcock
c68d30f70b Switch to ircu NICKLEN/MAXNICKLEN semantics.
Clients should use MAXNICKLEN for preallocation, and NICKLEN should be treated as
informative.
2011-11-29 16:24:48 -06:00
William Pitcock
a83486bfe6 Remove nicklen_set barrier.
Since serverinfo::nicklen only controls NICKLEN_USABLE, we do not need to have a
barrier here.
2011-11-29 16:19:37 -06:00
William Pitcock
7b42eab627 Make sure ConfigFileEntry.nicklen follows the same semantics as real NICKLEN.
Otherwise, truncation would be one byte too short on nick changes.
2011-11-29 16:16:38 -06:00
William Pitcock
b583faf970 Add support for customizing the usable nick length.
This adds a new ISUPPORT token, NICKLEN_USABLE which is strictly an informative value.
NICKLEN is always the maximum runtime NICKLEN supported by the IRCd, as other servers may
have their own usable NICKLEN settings.  As NICKLEN_USABLE is strictly informative, and
NICKLEN is always the maximum possible NICKLEN, any clients which depend on NICKLEN for
memory preallocation will be unaffected by runtime changes to NICKLEN_USABLE.

The default NICKLEN is 50; the default serverinfo::nicklen in the config file is set to
30, which is the NICKLEN presently used on StaticBox.
2011-11-29 16:10:21 -06:00
William Pitcock
e2606551a2 Fix potential buffer-overflow from malformed RSFNC request. 2011-11-29 15:50:54 -06:00
Jilles Tjoelker
0cce01d388 Fix -Wformat errors found in ircd-ratbox.
We cannot use -Wformat meaningfully but ircd-ratbox trunk can.
2011-11-13 00:22:09 +01:00
Stephen Bennett
a695b0e40e Apply extended-join client cap to QJM joins 2011-11-12 14:41:01 +00:00
Jilles Tjoelker
92236e376a Remove an obsolete TS5 reference. 2011-11-01 22:07:32 +01:00
Jilles Tjoelker
d74fa5b502 Prefer PATH_MAX to non-standard MAXPATHLEN. 2011-10-28 16:45:18 +02:00
Jilles Tjoelker
c55b2782fc Properly update 004/005 when a rehash changes use_forward. 2011-10-25 00:38:27 +02:00
Stephen Bennett
717f809762 Don't treat +r specially when displaying supported channel modes.
This used to be only advertised if a service was linked, which made
sense in ratbox when +r was only settable if services were available.
Now, however, +r is always available and so should always be advertised.
2011-10-24 19:59:31 +01:00
Jilles Tjoelker
db6b1735cf ilog_error: Avoid overwriting errno before sending it to opers. 2011-10-21 23:21:22 +02:00
Jilles Tjoelker
894325fe41 Force client_flood_burst_rate and client_flood_burst_rate to at least rfc1459 values (5). 2011-10-04 22:16:01 +02:00
Jilles Tjoelker
5a72f20c2c Limit sent_parsed to the highest possible value in the current config.
After a configuration change (or deoper with no_oper_flood) sent_parsed
might be way higher than allow_read, so that the user would have to wait
a long time before the server responds. Avoid this.
2011-10-04 01:08:12 +02:00
Jilles Tjoelker
a75bf40dad Fix weirdness with client_flood_burst_rate and client_flood_burst_max.
They are now in messages, even if client_flood_message_time is not 1.

If client_flood_message_time is not 1 (by default it is), this needs a
configuration change to maintain the same behaviour.
2011-10-04 00:57:49 +02:00
Jilles Tjoelker
d182b85454 Minor cleanup to command throttling code:
* Deduce allow_read from the client's state (IsFloodDone) rather than
   storing it in LocalUser.
 * Fix the documentation (in oper /info), however strange
   client_flood_burst_rate and client_flood_burst_max may seem, that is
   how they currently work.
2011-10-04 00:46:00 +02:00
Jilles Tjoelker
f9dda63969 Disable LocalUser.actually_read (write-only field). 2011-10-04 00:25:22 +02:00
Jilles Tjoelker
c598ff7b04 Fold client_flood_burst_rate check into MAX_FLOOD_BURST.
The original definition of floodgrace was MAX_FLOOD_BURST lines per second.
A second check for another number of lines per second makes no sense.
2011-10-04 00:21:19 +02:00
Jilles Tjoelker
41ca4cac35 Enforce the average allowed send rate is at least the one allowed by rfc1459. 2011-10-04 00:13:53 +02:00
Jilles Tjoelker
6a85e665db If use_forward=no, ignore any forwarding for joins by local users. 2011-09-25 17:26:01 +02:00
Jilles Tjoelker
1aa35c8af1 Make sure to check the length of a ban mask before removing a forward channel.
Otherwise a line might be truncated later, leading to desyncs.
2011-09-25 16:25:17 +02:00
Jilles Tjoelker
2da6f6ebd7 Put back use_forward. 2011-09-25 16:22:29 +02:00
Jilles Tjoelker
93fbe9c349 Fix double-free when removing a ban.
del_id() should not free the ban anymore, its caller does that now.
2011-09-14 00:52:56 +02:00
Jilles Tjoelker
f890420014 Ensure all signals keep working after a SIGINT restart.
After setting up signal handlers, unmask the signals we care about
(installed handlers for).

When handling SIGINT, the kernel adds SIGHUP and SIGINT to the signal
mask (as requested in sigaction()); if execve() is called from the
signal handler, this change is persistent.
2011-08-31 01:04:40 +02:00
Keith Buck
2220472610 m_resv.c: replace erroneous UNXLINE cluster calls with UNRESV. 2011-08-18 03:48:40 +00:00
Elizabeth Jennifer Myers
25ea5d2fac Fix git fuckery.
Apparently my tree got horribly corrupted.
2011-08-12 21:27:52 -04:00
Elizabeth Jennifer Myers
73d0f900c0 chmode: fix construct_cflags_strings.
Accidentally ported too much from ircd-seven. Fix this.
2011-08-12 21:09:13 -04:00
Elizabeth Jennifer Myers
765d839d3c Port ircd-seven banfowards to charybdis.
nenolod gave the thumbs-up to port ircd-seven banfowards to charybdis to spb
for a while, and people have asked about it. Might as well do it since it's a
slow weekend.

Note that as a side effect use_forward is removed from the config and
unconditionally enabled!
2011-08-12 20:33:10 -04:00
Jilles Tjoelker
b4cdedaa2a override: Send notice when overriding can_send.
Also ensure no session deadline is maintained for a remote client.
2011-08-07 22:10:12 +02:00
Jilles Tjoelker
2a483a807d Remove a stale comment. 2011-08-07 22:04:16 +02:00
Elizabeth Jennifer Myers
89bfeb8fb1 Remove #define KEY from ip_cloaking modules.
I meant to do this 3 years ago when I rewrote the cloaking modules. I
never got around to it. Now I am. :p

Also add some basic comment headers whilst I'm here.
2011-07-25 23:38:56 -04:00
Elizabeth Jennifer Myers
95c4ec2524 Update my email. 2011-07-25 23:36:00 -04:00
Elizabeth Jennifer Myers
c985febc0b bandb/makefile.in: Add bantool to make clean. 2011-07-25 23:32:36 -04:00
Elizabeth Jennifer Myers
7eec45bc9d Back out chanroles.
While what chanroles are trying to accomplish is a good idea, it is
apparently unclear this is the proper way to do it. Until we figure out
the exact way we wish to do this, it should be reverted for now.
2011-07-07 21:24:14 -04:00
Elizabeth Jennifer Myers
e1ee78ae30 Partially revert e794d39a80.
As jilles pointed out, it is best that the chanserv access list always
remain synced with the grant list. Thus, the ability for clients to set
this is not a good idea unless services knows about the grant, but this
leads to all sorts of messy issues and likely isn't worth it.
2011-07-06 18:14:57 -04:00
Elizabeth Jennifer Myers
e794d39a80 Add client interface for GRANT.
TODO: implement notifications of grant privilege changes to the target.
2011-07-06 17:25:26 -04:00
William Pitcock
5b2fb1a7eb Update TODO. 2011-07-06 15:16:38 -05:00
William Pitcock
f3bfe2c271 chanroles: instead of checking for chanop + CHANROLE_UNSET combination, grant a default set of flags.
this allows ops with zero effective privilege.
2011-07-06 15:12:46 -05:00
William Pitcock
460b6d9fb2 chanroles: ENCAP GRANT should work under the assumption that we want to zero out
this makes setting new roles on a user much easier as we're just setting the roles they
should be having, instead of having to try to revoke roles we don't necessarily know
about.
2011-07-06 15:04:45 -05:00
William Pitcock
ae79dab6ae chanroles: grant initial set of flags to people added to a channel with CHFL_CHANOP.
this allows us to, later on, add a hook that will enable us to disable channel ops entirely
without causing permissions revocation.
2011-07-06 15:00:32 -05:00
Elizabeth Jennifer Myers
6d8ec56083 Add chanroles to isupport so clients know it exists. 2011-07-06 13:50:36 -04:00
Elizabeth Jennifer Myers
8aabb973c0 Implement chanroles, as discussed with nenolod.
The theory behind this is that services sends an ENCAP * GRANT #channel
UID :+flagspec message specifying the chanroles the user has. They are
mapped into flag bits and applied to the membership of the user. They
then are restricted or permitted to what they can do based on the
permissions mask regardless of rank.

For backwards compatibility, the default permission bit (without a GRANT
statement) allows a user to to anything an existing op can do ONLY if
they are an op.

Todo: make CHANROLE_STATUS work (the ability to apply +ov to people),
which is at the moment controlled by CHANROLE_MODE.
2011-07-06 13:46:22 -04:00
William Pitcock
0351022738 RSFNC: allow RSFNC against a target which just changes the capitalization of the nickname
this is useful for gently changing a nickname from ReTARDeDNICk to Retardednick, see
ns_cleannick in atheme git.
2011-07-02 19:53:21 -05:00
Jilles Tjoelker
45ed883584 rsfnc/svslogin: Add server notices for kills.
When we broadcast a KILL message, this generates server notices on all
other servers (assuming the target user exists). Therefore, we should
also send a notice to our local opers.
2011-06-25 15:56:22 +02:00
Jilles Tjoelker
2b843a5bdd dline,kline: Avoid breaking the protocol with bad bans. 2011-06-25 11:34:34 +02:00
Jilles Tjoelker
b5d9427a78 invite: Remove useless IsChannelName check. 2011-06-25 11:34:16 +02:00
Jilles Tjoelker
0941f28e7d knock,topic: Remove useless IsChannelName checks.
If !IsChannelName(name), then certainly find_channel(name) == NULL.
2011-06-25 11:17:37 +02:00